联系我们 24/7+86 18859254943
联系我们 24/7+86 18859254943

ABB SPFEC12 模拟输入模块

In stock

品牌:ABB

型号:SPFEC12

名称:模拟输入模块

质保:一年

  • 电话/Phone:17350011025 (微信同号)
  • 邮箱/Email:1713556114@qq.com
  • QQ:1713556114

SPFEC12 微处理器: 板载IntelCeleronM Processor或IntelPentiumM Processor。显现控制器: 主板内建的图形控制器具有能够进行并行数据处理和像素插入的3D超管线架构,全3D硬件加快,以及动画加快才能;350MHz完整的24-bit RAMDAC。VGA显现分辨率高达1600×1200@85Hz和2048×1536@75Hz。单/双通道LVDS(18-bit/24-bit)显现输出,显现分辨率高达1400×1050@18bit和1600×1200@24bit。TV(S-端子)显现输出。体系存储器: 供给一条200Pin200/266/333MHzDDR SO-DIMM体系内存扩大插槽,主板内存容量可扩大到1GB。IDE接口: 两个增强的ATA10/66/33规范IDE接口,可支撑多4个U1traATA100/66/33IDE设备。USB接口: 4个USB2.0高速接口,支撑480Mb/s传输率。网 卡:主板内建一个10/100Mb/s以太网控制器(Realtek RTL8139D),支撑网络引导发动功用。

SPFEC12

声 卡:主板内建一个规范的AC7音效芯片;支撑MIC-in、Line–out。I/O功用: 2个规范RS-232 串口(COM1~COM2)。一组规范miniDIN插座,经一转二转接电缆连接PS/2键盘和鼠标。 CF卡功用: 供给一个ComPactFlash Type II插槽,与IDE2接口共用一个IDE通道,当用户挑选运用CF卡时,IDE2接口就仅能运用一个IDE设备。CF卡在体系中默许处于Slave状态,用户可根据需求订制将CF设于Master状态。B I O S: 4Mb AWARD BIOS,支撑即插即用(Plug and Play ,PNP)。体系检测功用: CPU、体系机箱温度的检测,体系首要工作电压、CMOS电池电压的检测。Super I/O看门狗定时器:256级,可编程;可编程时刻到中断;时刻到事件复位体系。电源支撑: 插孔式DC电源插座,单5V电源供电。

SPFEC12

SPFEC12 microprocessor: On board IntelCeleron M Processor or IntelPentium M Processor. Display controller: The built-in graphics controller on the motherboard has a 3D hyper pipeline architecture that can perform parallel data processing and pixel insertion, with full 3D hardware acceleration and animation acceleration capabilities; 350MHz full 24 bit RAMDAC. VGA display resolution up to 1600 × 1200@85Hz And 2048 × 1536@75Hz . Single/dual channel LVDS (18 bit/24-bit) display output, with a display resolution of up to 1400 × 1050@18bit And 1600 × 1200@24bit . TV (S-terminal) display output. System memory: Provide a 200Pin200/266/333MHz DDR SO-DIMM system memory expansion slot, and the motherboard memory capacity can be expanded to 1GB. IDE interface: Two enhanced ATA10/66/33 standard IDE interfaces that can support up to four U1traATA100/66/33 IDE devices. USB interface: 4 USB 2.0 high-speed interfaces, supporting a transmission rate of 480Mb/s. Network card: A 10/100Mb/s Ethernet controller (Realtek RTL8139D) is built into the motherboard to support network boot function.

SPFEC12

Sound card: A standardized AC7 sound effect chip is built into the motherboard; Support MIC in, Line out. I/O function: 2 standard RS-232 serial ports (COM1~COM2). A set of standardized mini DIN sockets connected to the PS/2 keyboard and mouse through a one to two adapter cable. CF card function: Provide a ComPactFlash Type II slot that shares an IDE channel with the IDE2 interface. When users choose to use a CF card, the IDE2 interface can only use one IDE device. The CF card is implicitly allowed to be in the Slave state in the system, and users can customize the CF to be in the Master state according to their needs. BIOS: 4Mb AWARD BIOS, supporting Plug and Play (PNP). System detection function: Detection of CPU and system chassis temperature, detection of system primary working voltage and CMOS battery voltage. Super I/O watchdog timer: 256 levels, programmable; Programmable time to interrupt; Time to reset the event system. Power support: Jack type DC power socket, powered by a single 5V power supply.

Customers reviews

There are no reviews yet.

Be the first to review “ABB SPFEC12 模拟输入模块”

您的邮箱地址不会被公开。 必填项已用 * 标注

Search for products

Back to Top
Product has been added to your cart