用于与Profibus网络通信。每个频道可以:·担任DP管理员·作为—个DP奴隶·发送和接收FDL(第二层)消息·支持Master Class 1和Master Class 2的消息传递·支持上述所有模式的同时操作·支持标准Profibus波特率9.6K,19.2K，93.75K,187.5K,500K,1.5M，3M,6M和12M波特率·支持16位传输(VME D16)与VME A24(标准)和A16(短I/O)地址转移。特征：同时执行Profibus协议管理 DP-V1 服务OPC 数据访问服务器 v3.0通过双端口 RAM 接口轻松移植到各种操作系统设备级别的流程一致性数据用于存储配置数据的内部闪存通过 DP 配置和网络诊断软件实现快速调试从FDT框架应用中轻松访问DP-V1和PA变量。
SST-PFB3-VME-2
SST-PFB3-VME-2-E 5136-DNP 随着松紧调节臂信号的变化的智能交流电机驱动器使得Centrilift Cable公司在俄克拉荷马州克莱尔莫尔的工厂取消了PLC，提高了将成品电缆卷绕到卷筒上的生产率。Centrilift Cable为油井和气井中使用的电潜泵系统提供专用电缆。其产品包装有来自姐妹公司Centrilift泵厂的设备，以创建交钥匙泵送解决方案。这两家公司都是贝克休斯的分公司。电缆是为每个客户制造的，可以包括特定应用的电线数量和尺寸、绝缘和铠装涂层，使每根电缆具有不同的直径。成品电缆直接卷绕在一个大鼓上，从生产线上通过拉丝、包覆和绕线机送出。该操作由PLC控制，向两个“哑”交流电机驱动器发送0-10V控制信号:一个控制滚筒旋转，一个控制横向运动。然而，在每个缠绕过程之前，操作员首先必须使用图表和表格数据进行手动计算，以输入PLC程序，从而说明特定的电缆尺寸和进给速度。Centrilift决定审查该流程，看看是否可以提高效率。
SST-PFB3-VME-2
控制器模块具备温度控制功能，它能够感知室内温度，并根据设定的温度值进行自动调节。当室内温度高于设定值时，控制器会启动空调系统，使其运行以降低温度；当室内温度低于设定值时，控制器会停止空调系统，以保持室内舒适温度。控制器模块还具备风速控制功能，根据用户的需求，可以调节空调系统的风速。一般来说，空调系统有多档风速可供选择，通过控制器模块，用户可以根据自己的喜好或实际需求调节风速大小，以达到更好的舒适效果。湿度控制功能除了温度和风速，控制器模块还可以监测和控制室内湿度。在一些特定的场景中，如潮湿的气候或者需要保持恒定湿度的环境中，控制器模块可以根据设定值控制空调系统的湿度，保持室内湿度在合适的范围内。
SST-PFB3-VME-2
Used for communication with Profibus network. Each channel can: · serve as a DP administrator · act as a DP slave · send and receive FDL (second layer) messages · support message passing for Master Class 1 and Master Class 2 · support simultaneous operation of all the above modes · support standard Profibus baud rates of 9.6K, 19.2K, 93.75K, 187.5K, 500K, 1.5M, 3M, 6M, and 12M baud rates · support 16 bit transmission (VME D16) and VME A24 (standard) and A16 (short I/O) address transfer. Features: Simultaneously executing Profibus protocol management DP-V1 service OPC data access server v3.0, easily ported to various operating system device level process consistency data for storing configuration data. Internal flash memory for fast debugging through DP configuration and network diagnostic software. Easy access to DP-V1 and PA variables from FDT framework applications.
SST-PFB3-VME-2
The intelligent AC motor driver of SST-PFB3-VME-2-E 5136-DNP, which changes with the signal of the tension adjustment arm, has led Centrilift Cable to cancel the PLC at its factory in Clairmore, Oklahoma, improving the productivity of winding finished cables onto the drum. Centrilift Cable provides specialized cables for electric submersible pump systems used in oil and gas wells. Its products are packaged with equipment from Centrilift Pump Factory, a sisters company, to create a turnkey pumping solution. These two companies are both subsidiaries of Baker Hughes. Cables are manufactured for each customer and can include specific application specific wire quantities and sizes, insulation and armor coatings, allowing each cable to have a different diameter. The finished cable is directly wound on a large drum and sent out from the production line through wire drawing, wrapping, and winding machines. This operation is controlled by PLC and sends 0-10V control signals to two “dumb” AC motor drivers: one controls the rotation of the drum and the other controls lateral movement. However, before each winding process, the operator must first manually calculate using chart and table data to input into the PLC program to illustrate specific cable sizes and feed rates. Centrilift has decided to review the process to see if it can improve efficiency.
SST-PFB3-VME-2
The controller module has temperature control function, which can sense indoor temperature and automatically adjust according to the set temperature value. When the indoor temperature exceeds the set value, the controller will start the air conditioning system to operate to reduce the temperature; When the indoor temperature drops below the set value, the controller will stop the air conditioning system to maintain a comfortable indoor temperature. The controller module also has a wind speed control function, which can adjust the wind speed of the air conditioning system according to user needs. Generally speaking, the air conditioning system has multiple wind speeds to choose from, and through the controller module, users can adjust the wind speed according to their preferences or actual needs to achieve better comfort. In addition to temperature and wind speed, the humidity control function of the controller module can also monitor and control indoor humidity. In certain specific scenarios, such as humid climates or environments that require constant humidity, the controller module can control the humidity of the air conditioning system based on the set values to maintain indoor humidity within an appropriate range
There are no reviews yet.