BENTLY 350045 双通道模块 该增强式内华达键盘相模块是一个半高,双通道模块,用于提供键盘相信号在3500个机架的监视模块。该模块接收来自近距离探测器或磁接收器的输入信号,并将信号转换为指示轴上的键盘相位标记何时与键盘相位传感器重合的数字键盘相位信号。3500机器保护系统可接受四个键盘相位信号正常配置和八个键盘相位信号成对配置。增强的键盘相位模块是一个改进的3500系统模块。它提供了与先前设计相比扩大的键盘相位信号处理能力,同时在形式、适应和功能方面与现有的键盘相位模块保持向下兼容性,供遗留系统使用。关键阶段模块P瓦125792-01被更新的149369-01模块完全取代。3500/45胀差监测器是一个四通道监测器，它从涡流传感器接收输入信号，并用该信号驱动报警。利用3500框架组态软件为3500/45编程，可以执行以下任何一种功能:胀差、补偿式输入胀差、机壳膨胀（CH3、CH4）。
350045
3500/45监测器使用位移输入/输出模块，该模块能接收来自以下本特利传感器的输入信号。流传感器：25、35和50mm扩展范围传感器及LVDT。3500/45监测器的基本作用是提供1)机械保护，通过连续不断地比较当时的转子位移与报警设置点来驱动报警2)将重要的转子位移信息给操作人员和维修人员。报警设置点可用3500框架组态软件来设置。可为每个有效成比例值设置报警设置点，也可根据监测器类型为每一个或两个有效成比例值设置危险设置点。当远离厂家时，3500/45是以未组态过的形式交货的。当需要时，3500/45可以被安装进3500框架，进行组态以执行所要求的监测功能。3500/45 差胀/轴向位置监测器是一个可接收趋近式涡流传感器、旋转位置传感器(RPT)、DC 线性可变微分变换器(DCLVDT)、AC 线性可变微分变换器(AC LVDT)和旋转电位计输入信号的4 通道监测器。
350045
BENTLY 350045 Dual Channel Module This enhanced Nevada keyboard phase module is a half height, dual channel module used to provide keyboard signal monitoring across 3500 racks. This module receives input signals from proximity detectors or magnetic receivers and converts the signals into digital keyboard phase signals indicating when the keyboard phase markers on the axis coincide with the keyboard phase sensor. The 3500 machine protection system can accept normal configuration of four keyboard phase signals and paired configuration of eight keyboard phase signals. The enhanced keyboard phase module is an improved 3500 system module. It provides expanded keyboard phase signal processing capabilities compared to previous designs, while maintaining downward compatibility with existing keyboard phase modules in terms of form, adaptation, and functionality, for use by legacy systems. The critical phase module P tile 125792-01 has been completely replaced by the updated 149369-01 module. The 3500/45 differential expansion monitor is a four channel monitor that receives input signals from eddy current sensors and uses this signal to drive alarms. Using the 3500 Rack Configuration Software to program 3500/45, you can perform any of the following functions: differential expansion, compensated input differential expansion, and casing expansion (CH3, CH4).
350045
The 3500/45 monitor uses a displacement input/output module that can receive input signals from the following Bentley sensors. Flow sensors: 25, 35, and 50mm extended range sensors and LVDT. The basic function of the 3500/45 monitor is to provide 1) mechanical protection, which drives alarms by continuously comparing the rotor displacement with the alarm set point at that time. 2) Provide important rotor displacement information to operators and maintenance personnel. Alarm setpoints can be set using the 3500 rack configuration software. Alarm setpoints can be set for each valid proportional value, or danger setpoints can be set for each or both valid proportional values based on the monitor type. When away from the manufacturer, the 3500/45 is delivered in an unconfigured form. When needed, the 3500/45 can be installed into the 3500 rack for configuration to perform the required monitoring functions. The 3500/45 differential expansion/axial position monitor is a 4-channel monitor that can receive input signals from approaching eddy current sensors, rotating position sensors (RPT), DC linear variable differential converters (DCLVDT), AC linear variable differential converters (AC LVDT), and rotating potentiometers.
350045
There are no reviews yet.