GE IC695CRU320 是来自 PACSystems RX3i 产品系列的冗余处理器。GE IC695CRU320 处理器由归类为可编程自动化控制器 (PAC) 的 GE Fanuc / Emerson 自动化制造。GE IC695CRU320 特别适用于冗余或热备配置。通过这种控制器配置，可用性显着提高。两个控制器机架，其配置功能与主要和次要机架相似。当单个机架发生故障时，主要是由于GE IC695CRU320 检测到的错误或 IC695CRU320 处理器本身的错误，活动控制器任务自动转移到辅助。辅助机架成为主机架，故障机架转移到辅助机架。此外，还可以进行手动切换。GE IC695CRU320 控制器切换以最多1 次逻辑扫描执行，最短切换时间为 3.133 毫秒。它支持高达 IC695RMX128/228 的同步链路，并能够传输高达 2Mbytes 的数据。
IC695CPU320-CF
凭借具有 1GHz 处理速度和 64MB 用户内存的赛扬 M 处理器，该控制器非常适合用于具有更高关键级别的大型复杂应用程序。此外，该处理器最多可保存 512 个程序块，每个程序块的大小可达 128 KB。GE IC695CRU320 处理器安装到 RX3i 背板上，直接安装到外围组件互连 (PCI) 插槽。与总线的其他模块连接也通过 PCI 2.2 版本或更高版本。该 PCI 插槽支持在背板内快速传输和共享数据。IC695CRU320 还支持 90-30 系列 I/O 模块进行分阶段迁移。GE Fanuc IC695CRU320 CPU 的电流要求是 3.3 V DC 时为 1 Amp，5 V DC 时为 1.2 Amp。
IC695CPU320-CF
模块上有两个集成串行端口，它们分别支持 RS-232 和 RS-485 通信。最多可配置 512 个程序块，其中每个块支持高达 128 KB 的大小。额定闪存寿命额定值至少为 100,000 次写入/擦除周期。切换时间最短为 3.133 毫秒，最长为 1 次逻辑扫描。一次可传输的最大数据量为 2 MB。GE IC695CRU320 CPU 最多支持两个 IC695RMX128/228 同步链路以实现冗余。GE IC695CRU320 CPU 的编程可以用梯形图、C 和功能块图语言完成。
IC695CPU320-CF
GE IC695CRU320 is a redundant processor from the PACSystems RX3i product series. The GE IC695CRU320 processor is manufactured by GE Fanuc/Emerson Automation, which is classified as a Programmable Automation Controller (PAC). GE IC695CRU320 is particularly suitable for redundant or hot standby configurations. Through this controller configuration, availability is significantly improved. Two controller racks, with configuration functions similar to the primary and secondary racks. When a single rack fails, it is mainly due to errors detected by GE IC695CRU320 or errors in the IC695CRU320 processor itself that the active controller task automatically shifts to auxiliary. The auxiliary rack becomes the main rack, and the faulty rack is transferred to the auxiliary rack. In addition, manual switching can also be performed. The GE IC695CRU320 controller switch is executed with a maximum of 1 logical scan and a minimum switch time of 3.133 milliseconds. It supports synchronization links up to IC695RMX128/228 and can transmit up to 2Mbytes of data.
IC695CPU320-CF
With a Celeron M processor with 1GHz processing speed and 64MB user memory, this controller is highly suitable for large and complex applications with higher critical levels. In addition, the processor can store up to 512 program blocks, each with a size of up to 128 KB. The GE IC695CRU320 processor is installed on the RX3i backplane and directly into the peripheral component interconnect (PCI) slot. The connection to other modules of the bus is also through PCI version 2.2 or higher. This PCI slot supports fast data transfer and sharing within the backplane. IC695CRU320 also supports staged migration of 90-30 series I/O modules. The current requirement for the GE Fanuc IC695CRU320 CPU is 1 Amp at 3.3 V DC and 1.2 Amp at 5 V DC.
IC695CPU320-CF
There are two integrated serial ports on the module that support RS-232 and RS-485 communication, respectively. Up to 512 program blocks can be configured, with each block supporting sizes up to 128 KB. The rated flash memory life rating is at least 100000 write/erase cycles. The minimum switching time is 3.133 milliseconds, and the maximum is 1 logical scan. The maximum amount of data that can be transferred at once is 2 MB. The GE IC695CRU320 CPU supports up to two IC695RMX128/228 synchronous links for redundancy. The programming of the GE IC695CRU320 CPU can be completed using ladder diagram, C, and functional block diagram languages.
There are no reviews yet.