GEIS215UCVEH2A是用于可编程逻辑控制器的通用电压模块。它有16个输入点，可用于监测和控制工业自动化中的各种过程。该模块使用24V直流电源，最大输入电压为30V直流。
IS215UCVEH2A模块通过其串行接口提供与PLC的高速通信。它使用GE Fanuc Genius lO协议进行通信，从而能够轻松地与其他GE Fanuc产品集成。该模块的设计便于安装和维护。它有LED指示灯，显示每个输入点的状态，使故障排除和维护更容易。该模块还具有内置诊断功能，可帮助快速检测和隔离故障。总的来说，GE IS215UCVEH2A是一款可靠高效的通用电压模块，满足工业自动化的苛刻要求。
IS215UCVEH2A
GE IS215UCVEH2A 通用电压模块在供电用电的线路中电流电压大大小小相差悬殊从几安到几万安都有。为便于二次仪表测量需要转换为比较统一的电流，另外线路上的电压都比较高如直接测量是非常危险的。电流互感器就起到变流和电气隔离作用。较早前，显示仪表大部分是指针式的电流电压表，所以电流互感器的二次电流大多数是安培级的如5A等。当今电星测量大多数字化，而计算机的采样的信号一般为毫安级(0-5V、4-20mA等)。微型电流互感器二次电流为毫安级，主要起大互感器与采样之间的桥梁作用。
IS215UCVEH2A
GEIS215UCVEH2A is a universal voltage module for programmable logic controllers. It has 16 input points that can be used to monitor and control various processes in industrial automation. This module uses a 24V DC power supply with a maximum input voltage of 30V DC.The IS215UCVEH2A module provides high-speed communication with the PLC through its serial interface. It uses the GE Fanuc Genius lO protocol for communication, making it easy to integrate with other GE Fanuc products. The design of this module is easy to install and maintain. It has LED indicator lights to display the status of each input point, making troubleshooting and maintenance easier. This module also has built-in diagnostic functions to help quickly detect and isolate faults. Overall, GE IS215UCVEH2A is a reliable and efficient universal voltage module that meets the demanding requirements of industrial automation.
IS215UCVEH2A
The GE IS215UCVEH2A universal voltage module has significant differences in current and voltage in power supply lines, ranging from a few amperes to tens of thousands of amperes. For the convenience of secondary instrument measurement, it is necessary to convert it into a relatively uniform current, and in addition, the voltage on the circuit is relatively high, which is very dangerous if measured directly. The current transformer serves as a transformer and electrical isolation device. Earlier, most display instruments were pointer type current and voltage meters, so the secondary current of current transformers was mostly of ampere level, such as 5A. Nowadays, most of the measurements on electric stars are digitized, and the signals sampled by computers are generally in the milliampere level (0-5V, 4-20mA, etc.). The secondary current of the micro current transformer is milliampere level, mainly serving as a bridge between the large transformer and sampling.
IS215UCVEH2A
PLC控制器本身的硬件采用积木式结构，各厂家产品结构大同小异。以日本欧姆龙C200HE为例，为总线模板框式结构，基本框架(CPU母板)上装有CPU模板，其它槽位装有I/O模板;如果I/O模板多时，可由CPU母板经I/O扩展电缆连接I/O扩展母板，在其上装I/O模板;另一种方法是配备远程I/O从站等。这些都说明了PLC厂家将硬件各部件均向用户开发，便于用户选用，配置成规模不等的PLC，而且这种硬件配置的开放性，为制造商、分销商(代理商)、系统集成商、最终用户带来很多方便，为营销供应链带来很大便利，这是一大成功经验。
IS215UCVEH2A
There are no reviews yet.