T8800它旨在与电源、控制计算机、现场连接和外部网络连接一起用作完整AADvance系统的一部分。ICS T8800控制器是一种数字输出单工型控制器模块。ICS T8800它带有8个输出通道，其额定电压为24伏直流电。ICS Triplex T8800该控制器支持1.174 毫秒和2.202 毫秒的双扫描时间。ICS T8800数字输出控制器模块已获准在非危险工业环境中使用。ICS T8800它可以与 AADvance T9892 终端组件模块一起使用，为其提供8个支持双配置的附加输出通道。ICS T8800罗克韦尔AB 数字输入模块可以为每个输入组设置此字段。输入值配置过加速阈值上限(RPM/s)。这定义了可以通过应用程序接口设置的最大过加速阈值级别。当加速度大于或等于配置的阈值时，过加速输出将跳闸。
T8800
可用于此字段的值范围为0到10000。默认值为零。如果限制设置为零，则组的过加速跳闸阈值将被禁用即始终跳闸。仅当组速度为零时，配置的限制才能增加。ICS T8800可以为组内的每个输出设置此复选框。如果输出已配置为闭锁，将此复选框设置为ticketstate将配置自动跳闸复位的输出。对于配置为非闭锁的输出，此配置项无效。清除复选框(默认)将禁用该输出的自动重置功能。ICS T8800在自动复位模式下，当组处于零速度时，闭锁输出的输出跳闸条件将自动复位。默认操作模式是禁用自动复位。
T8800
The T8800 is designed to be used as part of a complete AADvance system in conjunction with power supplies, control computers, on-site connections, and external network connections. The ICS T8800 controller is a digital output simplex type controller module. ICS T8800 comes with 8 output channels and is rated for 24 VDC. The ICS Triplex T8800 controller supports dual scan times of 1.174 milliseconds and 2.202 milliseconds. The ICS T8800 digital output controller module has been approved for use in non hazardous industrial environments. The ICS T8800 can be used with the AADvance T9892 terminal component module, providing it with 8 additional output channels that support dual configuration. The ICS T8800 Rockwell AB digital input module can set this field for each input group. The input value is configured to exceed the upper limit of the acceleration threshold (RPM/s). This defines the maximum over acceleration threshold level that can be set through the application program interface. When the acceleration is greater than or equal to the configured threshold, the over acceleration output will trip.
T8800
The range of values available for this field is 0 to 10000. The default value is zero. If the limit is set to zero, the group’s over acceleration trip threshold will be disabled, meaning it will always trip. The configured limit can only be increased when the group speed is zero. ICS T8800 can set this checkbox for each output within the group. If the output is configured as locked, setting this checkbox to ticketstate will configure the output for automatic trip reset. This configuration item is invalid for outputs configured as non latching. Clearing the check box (default) will disable the automatic reset function for this output. In the automatic reset mode of ICS T8800, when the group is at zero speed, the output tripping condition of the blocking output will automatically reset. The default operating mode is to disable automatic reset.
There are no reviews yet.