GE IC693PWR321 电源模块 用来提供外部电压的隔离式

GE Fanuc IC693PWR321是一个标准电源模块，是GE Fanuc 90-30系列平台的一部分。该电源的负载能力为30瓦，标称输入电压为100至240 VAC或125 VDC。它的输出容量为15瓦 5VDC、20瓦 24VDC和15瓦 +24VDC继电器。GE Fanuc IC693PWR321模块是90-30系列的电源模块。它为Fanuc 90-30系列PLC的处理能力提供动力。它位于底板最左侧的插槽中。它的额定功率为30瓦。它可以与交流和直流电源一起工作。设备的输入电压源的电压范围必须介于85和264伏交流电或100和300伏直流电之间。它提供不同的电压输出：为电路提供电源的5伏直流、24伏直流电压，以及一些模块用来提供外部电源的隔离式24伏直流电压电源。它的浪涌电流峰值为4安培，最长持续时间为250毫秒。该可编程控制器电源装置结构坚固，并配有电池。IC693PWR321模块与任何CPU型号完全兼容。电源模块通过了cULus和CE标准认证。它设计用于在Class 1 Division 2额定环境中工作。

IC693PWR321

IC693PWR321模块具有电源限制功能，可在发生直接短路时立即保护硬件。电源装置配有6个用于操作员连接的端子。它具有增强的诊断功能，可以为操作员跟踪所有事件和更新。供电设备内置智能开关熔断器作为保护措施。对于通信，IC693PWR321模块配备了一个RS-485串口。串口可用于连接不同的外围设备和CPU/计算机。IC693PWR321能够使用交流或直流电源供电。该电源的交流输入电压范围为85-264 VAC，标称值为120-240VAC。对于直流电源电压，可接受的电压范围为100-300 VDC，标称值为125 VDC。它的输入功率要求为90 VA（交流输入）和50W（直流输入）。它可以承受4 A峰值浪涌电流，持续时间为250毫秒。IC693PWR321输出功率能力包括最大15瓦的5 VDC和24VDC继电器操作；24VDC继电器最大15瓦，24VDC隔离最大20瓦。该电源的输出电压为5.0 VDC至5.2 VDC，标称值为5.1 VDC；24VDC至28VDC用于24VDC继电器；21.5VDC至28VDC，用于隔离24VDC操作。它具有6.4VDC至7VDC的过压保护和4A的过流保护，最大保持时间为20毫秒。

IC693PWR321

GE Fanuc IC693PWR321 is a standard power module that is part of the GE Fanuc 90-30 series platform. The load capacity of this power supply is 30 watts, and the nominal input voltage is 100 to 240 VAC or 125 VDC. Its output capacity is a 15 watt 5VDC, 20 watt 24VDC, and 15 watt+24VDC relay. The GE Fanuc IC693PWR321 module is a power module for the 90-30 series. It provides power for the processing capability of Fanuc 90-30 series PLCs. It is located in the leftmost slot of the motherboard. Its rated power is 30 watts. It can work together with AC and DC power sources. The voltage range of the input voltage source of the device must be between 85 and 264 volts AC or 100 and 300 volts DC. It provides different voltage outputs: a 5V DC and 24V DC voltage that provides power to the circuit, and an isolated 24V DC voltage power supply that some modules use to provide external power. Its peak surge current is 4 amperes, with a maximum duration of 250 milliseconds. The power supply device of this programmable controller has a sturdy structure and is equipped with a battery. The IC693PWR321 module is fully compatible with any CPU model. The power module has passed cULus and CE standard certification. It is designed to operate in Class 1 Division 2 rated environments.

IC693PWR321

The IC693PWR321 module has a power limiting function, which can immediately protect the hardware in the event of a direct short circuit. The power supply unit is equipped with 6 terminals for operator connections. It has enhanced diagnostic capabilities that can track all events and updates for operators. The power supply equipment is equipped with an intelligent switch fuse as a protective measure. For communication, the IC693PWR321 module is equipped with an RS-485 serial port. Serial ports can be used to connect different peripheral devices and CPUs/computers. IC693PWR321 can be powered by AC or DC power sources. The AC input voltage range of this power supply is 85-264 VAC, with a nominal value of 120-240 VAC. For DC power supply voltage, the acceptable voltage range is 100-300 VDC, with a nominal value of 125 VDC. Its input power requirements are 90 VA (AC input) and 50W (DC input). It can withstand a peak surge current of 4 A for a duration of 250 milliseconds. The output power capability of IC693PWR321 includes a maximum of 15 watts for 5 VDC and 24 VDC relay operation; 24VDC relay has a maximum of 15 watts, and 24VDC isolation has a maximum of 20 watts. The output voltage of this power supply is 5.0 VDC to 5.2 VDC, with a nominal value of 5.1 VDC; 24VDC to 28VDC for 24VDC relays; 21.5VDC to 28VDC, used for isolating 24VDC operation. It has overvoltage protection from 6.4VDC to 7VDC and overcurrent protection from 4A, with a maximum holding time of 20 milliseconds.

IC693PWR321