TC-205-02-8M5ICS系统配套电源线缆供应

TC-001-02-56M5工控设备ICS TRIPLEX系统配套电源线缆供应远程扩展器机箱需要光纤TX/RX单元T8314和不同的通信电缆。每个扩展器总共需要六个光纤单元底盘（每端三个)。光纤单元是小型DIN导轨安装盒，可接受双电源。每个单元都有用于单独传输/接收单模光纤电缆的连接器。任何I/O模块、扩展器或用于远程/O的机箱。所有V/O模块共享通用功能和形式。在通用的级别上，所有V/O模块与模块间总线的接口，模块间总线提供电源并允许与TMR处理器。所有模块均为三重模块冗余。以下信息总结了一些比较流行的/O模块。更完整所有模块的详细信息可以在其各自的规范和产品描述中找到文件。V/O模块状态指示灯模块前面板上有六个模块状态指示灯;三个健康，一个活跃，一个待命，一个受过教育。40通道24Vdc数字输入模块的每个现场输入，如所示测量输入电压并将其与用户可配置的阈值电压，以确定报告的现场输入状态24Vdc数字输入模块当线路监控设备安装在现场开关处时，该模块可以检测现场电缆的开路和短路。线路监控功能为每个输入通道独立配置。该模块通过分辨率为1ms。状态的改变会触发一个SOE条目。是由每个通道上可以配置的电压阈值确定原因模块前面板上有输入通道状态指示灯，每个指示灯
一个字段输入。输入状态LED模式取决于电压电平现刚/V日勺团的炬元哭描式·关闭、绿色、红色、闪烁的绿色，或闪烁红色。可配置的电生七个阈值频带，如第8节所述。每个阈值带可以是定义为具有特定的指示器模式:
压阈值和LED模式允许用户自定义输入测量和状态指示，以适合个人应用程序要求。
在没有自定义的情况下，默认指示器模式适用于没有线路监控的数字输入。

TC-205-02-8M5ICS system supporting power cable supply
TC-205-02-8M5ICS system supporting power cable supply
TC-001-02-56M5 industrial control equipment ICS TRIPLEX system supporting power cable supply remote extender chassis requires fiber optic TX/RX unit T8314 and different communication cables. Each extender requires a total of six fiber optic unit chassis (three at each end). The fiber optic unit is a small DIN rail mounting box that can accept dual power supplies. Each unit has connectors for individual transmission/reception of single-mode fiber optic cables. Any I/O module, extender, or chassis used for remote/O. All V/O modules share common functions and forms. At a universal level, all V/O modules interface with the inter module bus, which provides power and allows communication with TMR processors. All modules are triple redundant. The following information summarizes some popular/O modules. More complete detailed information about all modules can be found in their respective specifications and product descriptions. There are six module status indicator lights on the front panel of the V/O module status indicator light module; Three healthy, one active, one standby, and one educated. For each field input of the 40 channel 24Vdc digital input module, measure the input voltage as shown and match it with a user configurable threshold voltage to determine the reported field input status. When the line monitoring equipment is installed at the field switch, the 24Vdc digital input module can detect open and short circuits in the field cables. The line monitoring function is independently configured for each input channel. This module has a resolution of 1ms. A change in state will trigger an SOE entry. The reason is determined by the voltage threshold that can be configured on each channel. There are input channel status indicator lights on the front panel of the module, and each indicator light
One field input. The input status LED mode depends on the voltage level, which is currently just/V, and the torch element of the spoon group is closed, green, red, flashing green, or flashing red. Seven configurable threshold frequency bands for electricity generation, as described in Section 8. Each threshold band can be defined as having a specific indicator pattern:
The pressure threshold and LED mode allow users to customize input measurements and status indications to meet personal application requirements.
In the absence of customization, the default indicator mode is applicable to digital inputs without line monitoring.