GE 控制器模块IC693TCM302B 模拟输入信号全新原装

GE 控制器模块IC693TCM302B 模拟输入信号全新原装

GE 控制器模块IC693TCM302B 模拟输入信号的输入通道是热电偶输入通道，其输出通道用于控制目的。IC693TCM302模块的输出电压范围为18至30伏DC，负载电流为100毫安。IC693TCM302B离线诊断
上电自启动时检查电源的自用于控制处理器。这些检查在各种控制执行顺序测试处理器的功能元素。红色和绿色在控制处理器模块前指标反映成功(或不成功的)完成的控制处理器启动的各个阶段
序列。运行时，看门狗定时器检定提供控制处理器函数的连续监测在正常系统操作。操作员通过印刷或意味着了解故障信息显示系统。离线诊断暂时装入
为完成综合目标的系统测试和检查系统各站设备。使用离线诊断，怀疑在控制处理器故障可分离和/或确认。现场总线模块IC693TCM302B
现场总线模块提供的数字l/O的连接，模拟量l/O，和智能变送器控制处理器。有两种类型的现场总线模块:主要和扩展。一些主要的模块可以扩大使用一个扩展模块。广泛的现场总线模块是可用的执行必要的接口信号转换制处理器和现场传感器和执行器。对现场总线的进一步信息模块，指的是现场总线模块产品规格表(PSS 21h-3b1 B3)。现场总线的灵活性控制处理器40是用三种不同的现场总线的配置，提供广泛的灵活性在现场总线实现:
?局部总线（图1）在只使用外壳，本地总线可以延伸至10米（30英尺)。达24总线模块〈不包括扩展模块）直接连接的地方巴士，这是多余的。
双轴(双导线同轴）现场总线延伸（图2）使用双轴电缆，现场总线可以选择性地延伸的外壳外，可高达1800米(6000英尺)长。达64总线模块〈不包括扩展模块）连接到扩展总线通过现场总线隔离器。(24现场总线模块，不包括扩展模块，可以连接到每个隔离器。）的双轴总线扩展可能是多余的。IC693TCM302B

GE controller module IC693TCM302B analog input signal
The input channel for the analog input signal of GE controller module IC693TCM302B is the thermocouple input channel, and its output channel is used for control purposes. The output voltage range of the IC693TCM302 module is 18 to 30 volts DC, with a load current of 100 milliamperes. IC693TCM302B offline diagnosis
Check the self use of the power supply to control the processor during power on and self start. These checks test the functional elements of the processor in various control execution sequences. The red and green indicators in front of the control processor module reflect the successful (or unsuccessful) completion of each stage of the control processor startup
Sequence. During runtime, watchdog timer verification provides continuous monitoring of control processor functions during normal system operation. Operators can display fault information through printing or other means. Offline diagnosis temporarily loaded
To achieve the comprehensive goal of system testing and inspection of equipment at each station of the system. Using offline diagnosis, it is suspected that faults in the control processor can be separated and/or confirmed. Fieldbus module IC693TCM302B
The fieldbus module provides digital l/O connections, analog l/O, and intelligent transmitter control processors. There are two types of fieldbus modules: primary and extended. Some major modules can be expanded using an extension module. A wide range of fieldbus modules are available for executing necessary interface signal conversion processors and field sensors and actuators. The further information module for fieldbus refers to the product specification table for fieldbus modules (PSS 21h-3b1 B3). The flexibility control processor 40 for fieldbus uses three different fieldbus configurations, providing a wide range of flexibility in fieldbus implementation:
? The local bus (Figure 1) can extend up to 10 meters (30 feet) using only the casing. The bus directly connected to the 24 bus module (excluding the expansion module) is redundant.
Dual axis (dual wire coaxial) fieldbus extension (Figure 2) uses dual axis cables, and the fieldbus can selectively extend up to 1800 meters (6000 feet) in length outside the casing. The 64 bus module (excluding the expansion module) is connected to the expansion bus through a fieldbus isolator. The dual axis bus extension for 24 fieldbus modules, excluding expansion modules, can be connected to each isolator. IC693TCM302B