A-B 1336-WB110控制器

1336-WB110制造商：Allen-Bradley / 罗克韦尔自动化描述：Allen-Bradley 1336-WB110 动态制动斩波器，380-480VAC，110A，RMS详细描述：Allen-Bradley 1336-WB110 动态制动斩波器，380-480VAC，110A，输入：750V DC 电源，110 ADC (RMS)，最小制动电阻：2.5Ohm，RMS，适用于 1336 Plus II 和 460V AC AF 交流驱动器

伦-布拉德利的1336-WB110动态制动斩波器模块是一个480伏交流制动斩波器模块,带有一个 2.5 欧姆制动电阻器,用于将制动扭矩从 10% 增加到 100%,用于艾伦-布拉德利1336、1336VT、1336PLUS、1336PLUSII、1336FORCE或1336影响变频器。制动斩波器模块具有200安、700伏交流电、费拉兹·肖姆特保险丝和教员公用室过压保护电路,可提供廉价但有效的过压保护,它还具有绝缘栅双极晶体管(IGBT)斩波晶体管电压控制在再生期间有效地调节直流母线电压。1336-WB110的工作电压范围为380-480伏交流电，工作电流为110A

1336-WB110的技术规格
制造商罗克韦尔自动化牌艾伦-布拉德利零件号/目录号1336-WB110描述动态制动斩波器额定电压380/415/460伏交流电

持续额定电流750伏直流斩波分析师绝缘栅双极型(IGBT)故障制动TTL游戏融合F1和F2产品生命周期状态*停产/过时

1336-WB110 1336-WB110 时商停产，我们这台被生产过的设备，很可能仍然可以提供剩余和/或更换时制造的 1336-WB 110，而不是迁移可能。

Allen-Bradley的1336-WB110动态制动波波器是一个480V制动斩波器模块交流器，有一个2.5欧姆的电阻制动模块，增加了All-Bradley 1336、1336VT、1336PLUS、1336PLUSII、 1336FORCE1336I 的 10-100% 提供 MP200ACT 频率制动或制动斩波器模块，具有 70A，70A，70A 交流交流费拉兹肖特丝，SCR 过压保护电路，以低价有效的过压保护电路它还具有绝缘栅极再生电阻（IGBT）V双波器交流电压范围，可在WB110调节直流的工作电压，工作电流为380-480A，工作电流为1100，在工作电流1336-WB110460交流电压驱动器的载重额定值，750V直流驱动器中搭载来自DC的750V直流驱动输入电压电源，动态报警值为2.5欧姆。

1336-WB110 Manufacturer: Allen-Bradley / Rockwell Automation Description: Allen-Bradley 1336-WB110 Dynamic Braking Chopper, 380-480VAC, 110A, RMS Detailed Description: Allen-Bradley 1336-WB110 Dynamic Braking Chopper, 380-480VAC, 110A, Input: 750V DC Supply, 110 ADC (RMS), Minimum Braking Resistance: 2.5Ohm, RMS, for 1336 Plus II and 440 Plus II. 480VAC, 110A, Input: 750V DC Supply, 110 ADC (RMS), Minimum Braking Resistance: 2.5Ohm, RMS, for 1336 Plus II and 460V AC AF AC Drives

Allen-Bradley’s 1336-WB110 Dynamic Braking Chopper Module is a 480-volt AC braking chopper module with a 2.5-ohm braking resistor for increasing braking torque from 10% to 100% for use with Allen-Bradley 1336, 1336VT, 1336PLUS, 1336PLUSII, 1336FORCE or 1336 impact inverters. The braking chopper module features a 200 amp, 700 volt AC, Ferraz-Schmidt fuse and faculty common room overvoltage protection circuitry for inexpensive but effective overvoltage protection, and it also features an insulated gate bipolar transistor (IGBT) chopper-transistor voltage control to efficiently regulate the dc bus voltage during regeneration. the 1336-WB110 operates on a voltage range of 380-480 volts AC, with an operating current of 110 A

Technical Specifications for the 1336-WB110
Manufacturer Rockwell Automation Brand Allen Bradley Part No./Catalog No. 1336-WB110 Description Dynamic Brake Chopper Rated Voltage 380/415/460 Volts AC

Continuously Rated 750 Volts DC Chopper Analyzer Insulated Gate Bipolar (IGBT) Failure Braking TTL Game Fusion F1 and F2 Product Life Cycle Status* Discontinued/Outdated

1336-WB110 1336-WB110 When the time merchant discontinued, we this unit that was manufactured, it is likely that surplus and/or replacement when manufactured 1336-WB 110 can still be supplied rather than relocated possibly.

Allen-Bradley’s 1336-WB110 Dynamic Braking Waveformer is a 480V braking chopper module alternator with a 2.5 ohm resistive braking module that adds 10- All-Bradley 1336, 1336VT, 1336PLUS, 1336PLUSII, 1336FORCE1336I. 100% Offers MP200ACT Frequency Braking or Braking Chopper Module with 70A, 70A, 70A AC AC Ferraz Schottische Filters, SCR Overvoltage Protection Circuitry for low cost and effective overvoltage protection circuitry It also has Insulated Gate Regenerative Resistor (IGBT) V Dual Wave AC Voltage Ranges which can be adjusted at WB110 for DC operating voltages, operating currents of 380-480A, and operating currents of 11.0V, 480A, 480A, 480A, 480A, 480A, 480A, 480A, and 480A. 480A, operating current of 1100, in the operating current of 1336-WB110460 AC voltage driver load rating, 750V DC driver in the 750V DC drive input voltage power supply from the DC carries a dynamic alarm value of 2.5 ohms.