ABB UFC760BE41 3BHE004573R0041 控制板模块 成都阳光熹禾

产品细节说明：UFC760BE41 3BHE004573R0041 ABB 控制板模块

1. 网络灵活性：
   • 该模块应用灵活，可以组成多种光纤网络，满足不同的工业或分布式电源架构需求。
2. 电接口设计：
   • 逻辑独立双总线电接口，可实现电接口的备份或者单设备接入双冗余总线系统。
   • 采用点对点的网络时，可以通过光纤连接两Profibus DP总线的网段。
   • 在双光口链形网络的光纤总线上，可以实现多网段的Profibus DP总线连接（最多200个）。
3. 冗余与自愈功能：
   • 采用双光口实现双纤环网冗余功能，当某处光纤故障时，系统能在10ms内重建网络链路，保障系统的正常通信。
   • 实现对信号传输的自愈保护功能，网络故障排除后系统会自动恢复。
4. 专有环网协议：
   • 采用公司自行研发的专有环网协议Ci-ring，不需设置，不需要根节点，快速完成网络的成环和解环功能。
5. 即插即用与简化安装：
   • 该系列产品即插即用，不需配置，大程度地简化了用户安装和调试过程。
6. 高性能指标：
   • 数据电接口采用9针的Sub_D插孔连接器，管脚定义符合Profibus DP的协议规范。
   • 支持多种通信速率，包括9.6kBit/s、19.2 kBit/s、45.45kBit/s等，最高可达12MBit/s。
   • 具备4000V的防雷击以及1.5A的过流保护和600W浪涌保护功能。
   • 光纤波长和接口类型多样，传输距离可达多模2Km，单模20Km，更远距离可选。

UFC760BE41 3BHE004573R0041

产品详情参数 ：UFC760BE41 3BHE004573R0041 ABB 控制板模块

• 在使用过程中，应确保PLC远离强干扰源，如电焊机、大功率硅整流装置和大型动力设备。
• PLC与高压电器不应安装在同一个开关柜内，柜内PLC与动力线之间的距离应大于200mm。
• 与PLC装在同一个柜子内的电感性负载，如功率较大的继电器、接触器的线圈，应并联RC消弧电路。

UFC760BE41 3BHE004573R0041 ABB  应用领域：

由于UFC760BE41 3BHE004573R0041控制板模块具有高度的灵活性和强大的网络功能，它广泛应用于需要高可靠性和稳定性的工业或分布式电源架构中，如工业自动化、电力监控、数据中心等领域。UFC760BE41 3BHE004573R0041控制板模块以其卓越的性能和广泛的应用场景，成为工业或分布式电源架构中的理想选择。其强大的网络功能、冗余与自愈能力以及即插即用的特点，为用户提供了高效、可靠的解决方案。

Product details: UFC760BE41 3BHE004573R0041 ABB control board module
Network flexibility:
This module is flexible in application and can form multiple fiber optic networks to meet different industrial or distributed power architecture requirements.
Electrical interface design:
Logical independent dual bus electrical interface, which can achieve backup of electrical interface or single device access to dual redundant bus system.
When using a point-to-point network, two Profibus DP bus segments can be connected via fiber optic cables.
On the fiber optic bus of a dual port chain network, it is possible to achieve multi segment Profibus DP bus connections (up to 200).
Redundancy and self-healing function:
Adopting dual optical ports to achieve dual fiber ring network redundancy function, when a fiber optic failure occurs, the system can rebuild the network link within 10ms, ensuring normal communication of the system.
Implement self-healing protection function for signal transmission, and the system will automatically recover after network faults are resolved.
Exclusive Ring Network Protocol:
Adopting the proprietary ring network protocol Ci ring independently developed by the company, it does not require setting up or root nodes, and can quickly complete the network’s ring forming and ring removing functions.
Plug and play and simplified installation:
This series of products is plug and play and does not require configuration, greatly simplifying the installation and debugging process for users.
High performance indicators:
The data electrical interface adopts a 9-pin Sub-D socket connector, and the pin definitions comply with the protocol specifications of Profibus DP.
Supports multiple communication rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, etc., with a maximum of 12MBit/s.
Equipped with 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection functions.
Fiber optic wavelengths and interface types are diverse, with transmission distances of up to 2Km for multimode and 20km for single-mode, and options for longer distances.
Product details and parameters: UFC760BE41 3BHE004573R0041 ABB control board module
During use, it should be ensured that the PLC is kept away from strong interference sources such as welding machines, high-power silicon rectifiers, and large power equipment.
PLCs and high-voltage electrical appliances should not be installed in the same switchgear, and the distance between PLCs and power lines in the cabinet should be greater than 200mm.
Inductive loads installed in the same cabinet as PLCs, such as the coils of high-power relays and contactors, should be connected in parallel with RC arc suppression circuits.

UFC760BE41 3BHE004573R0041 ABB application areas:

Due to its high flexibility and powerful network capabilities, the UFC760BE41 3BHE004573R0041 control board module is widely used in industrial or distributed power architectures that require high reliability and stability, such as industrial automation, power monitoring, data centers, and other fields. The UFC760BE41 3BHE004573R0041 control board module is an ideal choice for industrial or distributed power architecture due to its excellent performance and wide range of application scenarios. Its powerful network capabilities, redundancy and self-healing capabilities, and plug and play features provide users with efficient and reliable solutions.

其他型号推荐：UFC760BE41 3BHE004573R0041 ABB 控制板模块