产品细节说明：VM600 MPC4 200-510-100-034 Vibro-meter 高精度振动监测仪器
- 多通道测量功能，能够同时监测4个动态信号输入和2个转速/相位信号输入 。
- 动态信号输入完全可编程，能接收加速度、速度和位移信号或其他信号 。
- 提供多种物理测量选项，如相对轴振动、绝对轴振动、SMAX、偏心、轴位移、绝对和相对膨胀、动态压力等 。
- 转速/相位输入可以连接各种转速传感器（如：涡流，磁阻，TTL等），支持分数转速比 。
- 数字处理功能强大，包括数字滤波、数字积分或微分、数字调制（均方根，平均值，峰值，峰峰值等），频阶跟踪（振幅和相位）和传感器间隙测量 。
- 模拟量0-10V或4-20mA可选，从配套的IOC4T卡件输出 。
- 开关量可利用配套的IOC4T自带继电器，或其他槽位的RLC16和IRC4继电器卡进行输出 。
- MPC4卡件具有自检功能，内置了传感器OK监测和通道故障和报警状态监测，能够判断传感器、前置器、电缆故障、通道故障，以及报警等，并在MPC4前面板上的LED指示灯显示 。
VM600 MPC4 200-510-100-034
产品详情参数 ：VM600 MPC4 200-510-100-034 Vibro-meter 高精度振动监测仪器
- 输入通道：4个动态信号输入和2个转速/相位信号输入。
- 频率范围：0.5Hz至10kHz。
- 测量范围：0.1 mm/s至50 mm/s。
- 数据采样率：每秒256次。
- 工作温度：-20°C至60°C。
- 存储容量：10000个数据点。
- 供电电压：24VDC。
- 尺寸：约210 x 170 x 75 mm。
- 重量：约1.5 kg。
- 防护等级：IP20。
- 信号输入：BNC连接器。
- 通信接口：RS-485 。
VM600 MPC4 200-510-100-034 Vibro-meter 应用领域：
VM600 MPC4 200-510-100-034 主要应用于电力、石油、化工、钢铁、水泥等行业的旋转机械振动监测和故障诊断领域 。
这款仪器的设计考虑了工业环境的适应性，具有良好的抗震动和耐用性，能够在恶劣条件下长期稳定工作 。它还支持与多种外部系统的数据交换，如数据库、消息和排队系统，以便于数据存储、分析和处理 。
Product details: VM600 MPC4 200-510-100-034 Vibro meter high-precision vibration monitoring instrument
Multi channel measurement function, capable of simultaneously monitoring 4 dynamic signal inputs and 2 speed/phase signal inputs.
The dynamic signal input is fully programmable and can receive acceleration, velocity, displacement signals or other signals.
Provide multiple physical measurement options, such as relative axis vibration, absolute axis vibration, SMAX, eccentricity, axis displacement, absolute and relative expansion, dynamic pressure, etc.
The speed/phase input can be connected to various speed sensors (such as eddy current, reluctance, TTL, etc.) and supports fractional speed ratios.
The digital processing capabilities are powerful, including digital filtering, digital integration or differentiation, digital modulation (root mean square, average, peak to peak, etc.), frequency order tracking (amplitude and phase), and sensor gap measurement.
Analog quantity can be selected from 0-10V or 4-20mA, output from the matching IOC4T card.
The switch quantity can be output using the matching IOC4T built-in relay or RLC16 and IRC4 relay cards in other slots.
The MPC4 card has a self checking function, built-in sensor OK monitoring and channel fault and alarm status monitoring, which can determine sensor, preamplifier, cable fault, channel fault, and alarm, etc., and display them on the LED indicator light on the front panel of the MPC4.
Product details and parameters: VM600 MPC4 200-510-100-034 Vibro meter high-precision vibration monitoring instrument
Input channels: 4 dynamic signal inputs and 2 speed/phase signal inputs.
Frequency range: 0.5Hz to 10kHz.
Measurement range: 0.1 mm/s to 50 mm/s.
Data sampling rate: 256 times per second.
Working temperature: -20 ° C to 60 ° C.
Storage capacity: 10000 data points.
Supply voltage: 24VDC.
Size: Approximately 210 x 170 x 75 mm.
Weight: Approximately 1.5 kg.
Protection level: IP20.
Signal input: BNC connector.
Communication interface: RS-485.
VM600 MPC4 200-510-100-034 Vibro meter Application Fields:
VM600 MPC4 200-510-100-034 is mainly used in the fields of vibration monitoring and fault diagnosis of rotating machinery in industries such as power, petroleum, chemical, steel, and cement.
The design of this instrument takes into account the adaptability of industrial environments, with good resistance to vibration and durability, and can work stably for a long time under harsh conditions. It also supports data exchange with various external systems, such as databases, messaging, and queuing systems, for the purpose of data storage, analysis, and processing.
其他型号推荐：VM600 MPC4 200-510-100-034 Vibro-meter 高精度振动监测仪器
| GE Multilin 369 | 369-HI-R-0-0-0 | Motor | GE Multilin 369 | 369-HI-R-0-0-0 | Motor Management Relay |
| GE Multilin 369-HI-0-M-F-E-0 Motor manag | GE Multilin 369-HI-0-M-F-E-0 Motor management relay |
| GE 369-C101 | Multilin Lower Control Boa | GE 369-C101 | Multilin Lower Control Board | 1753-0005 |
| GE 369-C100 PCB | 1253-0002-C2 | Multili | GE 369-C100 PCB | 1253-0002-C2 | Multilin Upper Control |
| GE 369-P300 POWER SUPPLY BRD | 1253-0001 | GE 369-P300 POWER SUPPLY BRD | 1253-0001 |
| GE Multilin 369-A200 | Analog & I/O | GE Multilin 369-A200 | Analog & I/O Board | 1253-0003/1753-0003/840501 |
| Ge Multilin 269 | 269PLUS-D/O-261-100P-1 | Ge Multilin 269 | 269PLUS-D/O-261-100P-120 | Motore Gestione Relè |
| GE Multilin 269 | 269-PLUS-D/O-100P-125V | GE Multilin 269 | 269-PLUS-D/O-100P-125V | protective relay unit |
| GE 12HGA11J52 | Auxilary Relay | Type HG | GE 12HGA11J52 | Auxilary Relay | Type HGA |
| GE 12A0-0103-A3 | UR 100MBPS ETHERNET | | GE 12A0-0103-A3 | UR 100MBPS ETHERNET | Industrial control module |
| GE 104X905BA603 | G-95-149-H-9550 | OPER | GE 104X905BA603 | G-95-149-H-9550 | OPERATOR CONTROL PANEL |
| GE FANUC | GQPI2D100L2P-A | 0880001-01 | | GE FANUC | GQPI2D100L2P-A | 0880001-01 | OPERATOR PANEL |
| GE FANUC IC693CPU372-AE | IC693CPU372 | | GE FANUC IC693CPU372-AE | IC693CPU372 | CPU372 MODULE |
| GE IS420UCSCH2A-C | IS420UCSCH2A | Dual | GE IS420UCSCH2A-C | IS420UCSCH2A | Dual Core Mark VIe Controller |
| GE IS230STAOH2A | MKVIe | TERMINAL BOARD | GE IS230STAOH2A | MKVIe | TERMINAL BOARD |
| GE IS230TNSVH3A | Gas turbine card | GE IS230TNSVH3A | Gas turbine card |
| GE IS215UCVHM06A | IS415UCVHH1A | VET2-A | GE IS215UCVHM06A | IS415UCVHH1A | VET2-A21010 350-9300007672-12F010A1 |
| GE IC697CPM791-FD CPU Halt production | GE IC697CPM791-FD CPU Halt production |
| GE Module VMIACC-5595-208 350-805595-208 | GE Module VMIACC-5595-208 350-805595-208L |
| GE Module IS200TPROH1BBB Turbine Control | GE Module IS200TPROH1BBB Turbine Control Mark VI IS200 |
There are no reviews yet.