IS220PSVOH1A提供一个或两个 I/O 以太网网络与 TSVO 伺服终端板之间的电气接口。IS220PSVOH1A使用 WSVO 伺服驱动器模块来处理两个伺服阀位置环。PSVO有一个带有多个LED指示灯的前面板。其中包括四个指示两个以太网网络（ENet1/Enet2）状态的LED，以及一个电源和Attn LED，以及另外两个标记为ENA1/2的LED。正面还有一个红外端口，此包中未使用。
安装后，IS220PSVOH1A配置了控制系统工具箱应用程序。该套件包括一个带输入电源连接器的处理器板、本地电源和一个用于温度监控的内部传感器。该板还具有闪存和板载 RAM。该板连接到采集板。
更换IS220PSVOH1A时可以自动重新配置。此选项通过组件编辑器通过 ToolboxST 应用程序启用/禁用。如果需要，组件编辑器还允许操作员手动重新配置模块。更换端子板时，必须手动重新配置 I/O 包。
IS220PSVOH1B
IS220PSVOH1B
IS220PSVOH1A provides an electrical interface between one or two I/O Ethernet networks and the TSVO servo terminal board. IS220PSVOH1A uses the WSVO servo driver module to handle two servo valve position rings. PSVO has a front panel with multiple LED indicators. This includes four LEDs indicating the status of two Ethernet networks (ENet1/Enet2), as well as one power and Attn LED, and two other LEDs labeled ENA1/2. There is also an infrared port on the front, which is not used in this package.
After installation, IS220PSVOH1A is configured with the control system toolbox application. This kit includes a processor board with an input power connector, a local power supply, and an internal sensor for temperature monitoring. The board also has flash memory and onboard RAM. This board is connected to the acquisition board.
When replacing IS220PSVOH1A, it can be automatically reconfigured. This option is enabled/disabled through the ToolboxST application through the component editor. If necessary, the component editor also allows the operator to manually reconfigure the module. When replacing the terminal board, the I/O package must be manually reconfigured.
IS220PSVOH1B
IS220PSVOH1B
专业销售世界各大电气品牌产品产品海外直接采购，正品库存，价格优惠售后保修，型号齐全，一样的产品，不一样的价格与服务。大量供应原装进口DCS系统配件，PLC系统配件。主营:ABB、GE发那科、Bentl本特利、Triconex英维思、Woodward伍德沃德、Foxboro福克斯波罗、Westinghouse西屋/Emerson艾默生、Reliance瑞恩、SchneiderModicon施耐德莫迪康、A-B、HIMA黑马、Motorola摩托罗拉、Kollmorgen科尔摩根Bosch/Rexroth/博世力上乐，NI,YOKOGAWA横河，等各大品牌的DCS系统配件，机器人系统配件，大型伺服系统停产备件。
IS220PSVOH1B
There are no reviews yet.