联系我们 24/7+86 18859254943
联系我们 24/7+86 18859254943

ABB SC560 控制模块

In stock

品牌:ABB

型号: SC560

名称:控制模块

质保:一年

  • 电话/Phone:17350011025 (微信同号)
  • 邮箱/Email:1713556114@qq.com
  • QQ:1713556114

SC560 3BSE008105R1 底子单元 内置有CPU、电源、输入输出、程序内存的可编程控制器主机。 可联接各种扩展设备。扩展单元 内置电源的输入输出扩展。顺便联接电缆。 输入输出的最大扩展点数为256点。(特别扩展:最多8台) 与CC-Link远程I/O的算计最大为384点。 关于台数的具体内容,请参阅后述的机型选择。扩展模块 从底子、扩展单元取得电源供给的输入输出扩展。 内置联接电缆。扩展电源单元 AC电源型底子单元的内置电源缺少时,扩展电源。 可P给输出扩展模块或者特别功用模块供给电源。

SC560

特别单元 内置电源的特别控制用扩展。 顺便联接电缆。 输入输出的最大扩展点数为256点。(特别扩展:最多8台) 与CC-Link远程I/O的算计最大为384点。 关于台数的具体内容,请参阅后述的机型选择。特别模块 从底子、扩展单元取得电源供给的特别控制用扩展。 内置联接电缆。功用扩展板 可内置于可编程控制器中的,用于功用扩展的设备。 不占用输入输出点数。 可装置1块。可与特别适配器合用特别适配器 从底子单元取得电源供给的特别控制用扩展。 内置联接用接头。 联接高速输入用、高速输出用的特别适配器时,不需求功用扩展 板;但是与通信誉及模拟量用的特别适配器合用时,需求功用 扩展板。

SC560

不像机架装置的背板,背板的长度只与装置的I/O模块数量有关。FlexLogix处理器或1794 I/O适配器都可扩展1794 I/O模块。对于1794 FlEX I/O,装置非常模块化。背板是模块端子排组成,同时供给了I/O接线衔接端点。I/O线路分别在I/O模块中。每个I/O模块刺进各自的端子排中。1794 FLEX I/O模块,最大可选32点I/O。 可一个FlexLogix处理器最大装置8个本地I/O,还可在处理器3 英尺范围内通过扩展I/O适配器添加8个FlEX I/O模块。在处理器上刺进I/O扫描通讯卡,可远程散布更多的I/O点。FlexLogix处理器及FLEX I/O适配器内置电源,可将24VDC电源转为5VDC,为背板供电。也可选择独立的120/230VAC到24VDC电源。一切的体系模块都可用DIN导轨装置,FlexLogix处理器,1794 FLEX I/O模块也可背板装置。

SC560

The SC560 3BSE008105R1 base subunit is equipped with a programmable controller host with CPU, power supply, input/output, and program memory. Can connect various expansion devices. The input and output expansion of the built-in power supply in the expansion unit. By the way, connect the cables. The maximum number of extension points for input and output is 256. (Special expansion: up to 8 units) The maximum calculation for remote I/O with CC Link is 384 points. For specific information on the number of units, please refer to the model selection described later. The expansion module obtains input and output expansion of power supply from the base and expansion unit. Built in connection cable. When the built-in power supply of the AC power type base subunit of the expansion power unit is missing, the expansion power supply. P can supply power to output expansion modules or special function modules.

SC560

Special unit built-in power supply for special control expansion. By the way, connect the cables. The maximum number of extension points for input and output is 256. (Special expansion: up to 8 units) The maximum calculation for remote I/O with CC Link is 384 points. For specific information on the number of units, please refer to the model selection described later. The special module obtains power supply from the base and expansion unit for special control expansion. Built in connection cable. The function expansion board can be built into a programmable controller and used as a device for function expansion. Does not occupy input and output points. One unit can be installed. A special control extension that can be used in conjunction with a special adapter to obtain power supply from the base subunit. Built-in connector for connection. When connecting special adapters for high-speed input and high-speed output, no functional expansion board is required; However, when used in conjunction with special adapters for communication and analog quantities, a functional expansion board is required

SC560

Unlike the backplane of a rack device, the length of the backplane is only related to the number of I/O modules in the device. Both FlexLogix processors and 1794 I/O adapters can expand the 1794 I/O module. For the 1794 FLEX I/O, the device is very modular. The backplane is composed of module terminal strips and provides I/O wiring connection endpoints. The I/O lines are located separately in the I/O module. Each I/O module is inserted into its own terminal strip. 1794 FLEX I/O module, with a maximum of 32 selectable I/O. A maximum of 8 local I/Os can be installed on a FlexLogix processor, and 8 FLEX I/O modules can be added within 3 feet of the processor by expanding the I/O adapter. Piercing I/O scanning communication cards on the processor can remotely spread more I/O points. The FlexLogix processor and FLEX I/O adapter have a built-in power supply that can convert 24VDC power to 5VDC to power the backplane. You can also choose an independent 120/230VAC to 24VDC power supply. All system modules can be equipped with DIN rail devices, FlexLogix processors, 1794 FLEX I/O modules, and backplane devices

Customers reviews

There are no reviews yet.

Be the first to review “ABB SC560 控制模块”

您的电子邮箱地址不会被公开。 必填项已用 * 标注

搜索产品

Back to Top
Product has been added to your cart