IPMC712是可选的附加PMC模块。模块，可以向后兼容前代艾默生产品（如MVME2600、MVME2700和IPMC模式下的MVME5100）的后向兼容性。使用MVME761或MVME712M过渡模块。MHz PCI本地总线端口210/100BaseTXFP I/O端口110/100/1000BaseTXFP I/OPMCFP I/OPMCFP I/OEIA232P2 P1电池宇宙IIUARTL3 缓存2MB以太网10/100BaseTXPHYSDRRAM夹层512MB千兆位以太网控制器PMC插槽2NVRAM。RTCPCI桥接闪存32MB(已焊接)8MB(已焊接)MPC74571GHzPMCspan连接器SDRRAM133 MHz512 MBPCI桥和内存控制器发现IPMC插槽1一个单端超宽SCSI端口一个并行端口。
IPMC712
四个串行端口（两个或三个异步和一个或两个同步/同步，取决于模块)安装了IPMC后，仍有一个PMC插槽可用、提供对OEM产品定制的支持。P2 I/O模式MVME5500系列支持两种可通过跳线配置的P2 I/O模式： PMC模式和IPMC模式。PMC模式向后兼容MVME2300/MVME2400和MVME5100的PMC模式。MVME2400和MVME5100在PMC模式下向后兼容。在PMC模式下，PMC插槽1的64个引脚和PMC插槽2的46个引脚可用于PMC后部I/O在PMC模式下，PMC插槽1的64个引脚和PMC插槽2的46个引脚可用于PMC后部I/O。
IPMC712
在IPMC模式下，MVME5500系列支持传统的MVME761或MVME712M I/O模块（具有有限的当IPMC761或IPMC712 PMC卡插入PMC插槽1时，MVME5500系列支持传统的MVME761或MVME712M I/O模块（具有有限的PMC I/O）。当IPMC761或IPMC712 PMC卡被装入PMC插槽1时。在这种配置中，PMC在这种配置中，PMC 2槽包含一些信号，这些信号被保留给扩展SCSI。
IPMC712
IPMC712 is an optional additional PMC module. The module can be backward compatible with previous generations of Emerson products such as MVME2600, MVME2700, and MVME5100 in IPMC mode. Use the MVME761 or MVME712M transition module. MHz PCI local bus port 210/100BaseTXFP I/O port 110/100/1000BaseTXFP I/OPMCFP I/OPMCFP I/OEIA232P2 P1 battery universe IIUARTL3 cache 2MB Ethernet 10/100BaseTXPHYSDRRAM interlayer 512MB Gigabit Ethernet controller PMC slot 2NVRAM. RTCPCI bridge flash memory 32MB (soldered) 8MB (soldered) MPC74571GHz PMCspan connector SDRRAM133 MHz512 MB PCI bridge and memory controller discovered IPMC slot 1, a single ended ultra wide SCSI port, and a parallel port.
IPMC712
After installing IPMC on four serial ports (two or three asynchronous and one or two synchronous/synchronous, depending on the module), there is still one PMC slot available to provide support for OEM product customization. The P2 I/O mode MVME5500 series supports two configurable P2 I/O modes through jumpers: PMC mode and IPMC mode. PMC mode is backward compatible with the PMC mode of MVME2300/MVME2400 and MVME5100. MVME2400 and MVME5100 are backwards compatible in PMC mode. In PMC mode, 64 pins of PMC slot 1 and 46 pins of PMC slot 2 are available for PMC rear I/O. In PMC mode, 64 pins of PMC slot 1 and 46 pins of PMC slot 2 are available for PMC rear I/O
IPMC712IPMC712
In IPMC mode, the MVME5500 series supports traditional MVME761 or MVME712M I/O modules (with limited PMC I/O when the IPMC761 or IPMC712 PMC card is inserted into PMC slot 1). When the IPMC761 or IPMC712 PMC card is installed in PMC slot 1. In this configuration, PMC in this configuration, PMC slot 2 contains some signals that are reserved for extended SCSI.
There are no reviews yet.