ABB 1TGE120021R0010 转换器模块彩高速16位A/D转换器,测量数据稳定,蝮性好;自动程控电流源技术,电流源共设1000个电流档位,由内部微控制器根据被测电阻自动控制,从而达到此较宽的测量范围。度智能化设计,功能设置巧妙先进,可咱动判断测试线虚接、断线等故障;保护功能完善,能可靠保护反电势对仪器的冲击,具有自动放电指示功能;可显示测量电流和测量时间;智能化功率管理技术,可有效减轻仪器内部发热;可储存120次测量数据,掉电不秩;全部汉字菜单及操作提示,直观方便。
1TGE120021R0010
1TGE120021 R0010可配置开关和模拟模块,以最佳满足用户需求。它还可以通过大多数行业标准通信协议作为本地和/或远程扩展。1TGE120021R0010新产品:“极端环境” 模块和各种PROFINET接口模块。可根据需要测量半导体二极管、三极管的低频直流参数，集电极电流可达50A，基本满足500W以下的半导体管的测试。本机还附有高压的测试装置，可对5KV以下的半导体管进行击穿电压及反向漏电流测试，其测试电流灵敏度可达到0.5uA/度。本机所提供的基极阶梯信号还具有脉冲阶梯输出，因此可扩大测量范围及对二次击穿特性的测量。
1TGE120021R0010
ABB 1TGE120021R0010 converter module is a high-speed 16 bit A/D converter with stable measurement data and good performance; Automatic programmable current source technology, with a total of 1000 current levels set for the current source, is automatically controlled by an internal microcontroller based on the measured resistance, thus achieving this wide measurement range. Intelligent design with clever and advanced functional settings, allowing us to detect faults such as virtual connections or broken wires in the test line; The protection function is complete and can reliably protect the impact of back electromotive force on the instrument, with automatic discharge indication function; Can display measurement current and measurement time; Intelligent power management technology can effectively reduce internal heating of the instrument; Can store 120 measurement data, without any power outage; All Chinese character menus and operation prompts are intuitive and convenient.
1TGE120021R0010
1TGE120021 R0010 can be configured with switches and analog modules to best meet user needs. It can also be extended locally and/or remotely through most industry standard communication protocols. 1TGE120021R0010 New product: “Extreme Environment” module and various PROFINET interface modules. The low-frequency DC parameters of semiconductor diodes and transistors can be measured as needed, and the collector current can reach 50A, which basically meets the testing of semiconductor tubes below 500W. This machine also comes with a high-voltage testing device, which can test the breakdown voltage and reverse leakage current of semiconductor tubes below 5KV. Its testing current sensitivity can reach 0.5uA/degree. The base step signal provided by this machine also has a pulse step output, which can expand the measurement range and measure the secondary breakdown characteristics.
1TGE120021R0010
There are no reviews yet.