MicroNet数字控制器5466-318应用三模块冗余内核电源模块，5466-318模块由Woodward公司为MicroNet数字控制系列设计，设计为三模块冗余（TMR）内核电源（P.S）模块。当安装此模块时，它将作为三个内核电源之一在MicroNet TMR系统上运行的应用程序中使用。安装后，此模块将插入内核部分的插槽中。请注意，在移除此类模块之前，必须移除MicroNet TMR内核电源内的所有模块。5466-318模块的物理组成是金属的，模块的前面板上只有一个LED。模块面板上的LED用于指示设备的电源运行状况。该模块将在来自MicroNet主电源的24伏直流电源上运行。从MicroNet主电源接收到电源后，它将在内核部分的剩余部分将其调节为10 A或5 VDC。5466-318安装后，可用于多个不同的区域，这些区域如下：非危险区域、a-B-C-D组和2类区域。如果模块安装在非上述位置，则在操作过程中可能会出现潜在错误。
5466-316
Woodward Inc .为MicroNet数字控制系列设计的5466-318模块设计为三模块冗余(TMR)内核电源(P.S)模块。安装该模块后，它将作为三个内核电源之一用于在MicroNet TMR系统上运行的应用程序。安装时，这个模块将被插入内核部分的第一个插槽。请注意，在移除这样的模块之前，必须移除MicroNet TMR内核电源中的所有模块。5466-318模块的物理结构是金属的，在模块的前面板上只有一个LED。模块面板上的LED用于指示设备的电源健康状况。该模块将在来自MicroNet主电源的24伏直流电源下运行。从MicroNet主电源接收到电源后，它会将内核部分的剩余部分调节到10A或5v直流。5466-318安装后，可用于许多不同的区域，这些区域如下非危险场所、I级、A-B-C-D组和2区场所。如果模块安装在非上述位置，在运行过程中可能会出现错误。MicroNet数字控制系列中的许多型号被认为是过时的，因为Woodward不再生产这些型号，并且没有广泛供应，5466-318型号不属于这些型号，因为它仍然可以广泛供应。
5466-316
MicroNet digital controller 5466-318 applies three module redundant core power supply module. The 5466-318 module is designed by Woodward Company for MicroNet digital control series and is designed as three module redundant (TMR) core power supply (P.S) module. When installing this module, it will be used as one of the three kernel power supplies in applications running on MicroNet TMR systems. After installation, this module will be inserted into the slot in the kernel section. Please note that all modules within the MicroNet TMR core power supply must be removed before removing such modules. The physical composition of the 5466-318 module is metal, with only one LED on the front panel of the module. The LED on the module panel is used to indicate the power operation status of the device. This module will operate on a 24 volt DC power supply from the MicroNet main power supply. After receiving power from the MicroNet main power supply, it will adjust it to 10 A or 5 VDC in the remaining part of the kernel. After installation, 5466-318 can be used in multiple different areas, such as non hazardous areas, a-B-C-D groups, and Class 2 areas. If the module is installed in a location other than the above, potential errors may occur during operation.
5466-316
The 5466-318 module designed by Woodward Inc. for MicroNet digital control series is a three module redundant (TMR) core power supply (P.S) module. After installing this module, it will serve as one of the three kernel power supplies for applications running on MicroNet TMR systems. When installed, this module will be inserted into the first slot of the kernel section. Please note that all modules in the MicroNet TMR kernel power supply must be removed before removing such modules. The physical structure of the 5466-318 module is metal, with only one LED on the front panel of the module. The LED on the module panel is used to indicate the power health status of the device. This module will operate on a 24 volt DC power supply from the MicroNet main power supply. After receiving power from the MicroNet main power supply, it will adjust the remaining part of the core to 10A or 5V DC. After installation, 5466-318 can be used in many different areas, such as non hazardous locations, Class I, A-B-C-D groups, and Zone 2 locations. If the module is installed in a location other than the above, errors may occur during operation. Many models in the MicroNet digital control series are considered outdated as Woodward no longer produces these models and is not widely available. The 5466-318 models do not belong to these models as they can still be widely available.
There are no reviews yet.