3500/40M前置监视器是一个四通道监视器接受本特利内华达接近传感器的输入，调节信号以提供各种振动位置测星，并比较条件带有用户可编程报警的信号。用户可以使用3500框架对3500/40M的每个通道进行编程执行以下任何操作的配置软件功能:径向，震动，偏心率钢筋推力，位置差速器膨胀。3500/40M前置监视器的主要目的是提供以下内容:通过持续比较进行机械保护根据配置的警报监控参数驱动警报的设定点，操作和维护的基本机器信息维修人员，根据配置，每个通道通常，调节其输入信号以产生各种参数，称为静态值。您可以为以下项目配置报警设定点以下任意两项的每个活动静态值和危险设定值活动静态值。 每一静态值都有组态好的警告报警值，每两个静态值都可组态一个危险报警值。
350040M
本特利3500/40M是占用一个全高前面板槽位的四通道位移监测器模块，接收bently3300XL电涡流传感器的输入，对信号进行处理后生成各种振动和位移测量数据，并将处理后的信号与用户可编程的报警设置点进行比较。可以使用本特利3500/05框架组态软件3500/01-00对3500/40M的每个通道进行组态，使其具有如下功能：径向振动、轴向位移、差胀或轴偏心。本特利3500/40M监测器模块的主要功能为: 通过连续不断地将机器振动当前值与组态中的报警值进行比较，并驱动报警系统，从而达到保护机器的目的。为操作人员和维护人员提供关键设备的振动信息通过组态，每一通道通常将输入信号处理成“静态值”。
350040M
The 3500/40M front monitor is a four channel monitor that accepts inputs from Bently Nevada proximity sensors, adjusts signals to provide various vibration position measurements, and compares conditions with user programmable alarm signals. Users can use the 3500 framework to program and perform any of the following configuration software functions for each channel of the 3500/40M: radial, vibration, eccentricity, steel bar thrust, position differential expansion. The main purpose of the 3500/40M front-end monitor is to provide the following content: mechanical protection through continuous comparison, driving alarm set points based on configured alarm monitoring parameters, basic machine information for operation and maintenance, maintenance personnel, and adjusting input signals for each channel to generate various parameters, called static values, according to the configuration. You can configure each active static value and danger set point active static value for any two of the following items: alarm set points. Each static value has a configured warning alarm value, and each two static values can be configured with a danger alarm value.
350040M
The Bently 3500/40M is a four channel displacement monitor module that occupies a full height front panel slot, receives input from the bently3300XL eddy current sensor, processes the signal, generates various vibration and displacement measurement data, and compares the processed signal with user programmable alarm setpoints. You can use the Bentley 3500/05 framework configuration software 3500/01-00 to configure each channel of the 3500/40M to have the following functions: radial vibration, axial displacement, differential expansion, or shaft eccentricity. The main function of the Bentley 3500/40M monitor module is to continuously compare the current value of machine vibration with the alarm value in the configuration, and drive the alarm system to achieve the purpose of protecting the machine. Provide vibration information of key equipment for operators and maintenance personnel through configuration, and each channel typically processes input signals into “static values”.
350040M
PLC控制器本身的硬件采用积木式结构，各厂家产品结构大同小异。以日本欧姆龙C200HE为例，为总线模板框式结构，基本框架(CPU母板)上装有CPU模板，其它槽位装有I/O模板;如果I/O模板多时，可由CPU母板经I/O扩展电缆连接I/O扩展母板，在其上装I/O模板;另一种方法是配备远程I/O从站等。这些都说明了PLC厂家将硬件各部件均向用户开发，便于用户选用，配置成规模不等的PLC，而且这种硬件配置的开放性，为制造商、分销商(代理商)、系统集成商、最终用户带来很多方便，为营销供应链带来很大便利，这是一大成功经验。
350040M
There are no reviews yet.