NI BNC-2110 控制模块，桌面安装接线板。这接线盒提供68针、母SCSl到1针、母BNC(数量15)、30针、母弹簧端子的连接。这倪BNC-2110旨在与各种国家仪器公司多功能输入输出和模拟输出设备。这BNC-2110有助于简化模拟信号以及一些数字信号与DAQ设备的连接。与这个接线盒，可以获得更好的测量完整性，因为BNC-2110配有屏蔽外壳。桌面安装和DIN导轨安装配置都是可能的屏蔽接线盒。该设备使用NI-DAQmx驱动软件运行，该软件与LabVIEW、LabWindows/CVI或Measurement Studio等软件包兼容。可以使用测量和自动化浏览器(MAX)工具配置设备硬件。BNC-2110可用于100引脚或68引脚E/M/S系列或68引脚NI-672x、Nl-671x和N-673x模拟输出(AO系列)DAQ器件。这BNC国家仪器-2110广泛用于要求苛刻的生产、测试和实验室环境。
BNC-2110
这BNC-2110仅用于差分模拟输入信号。与这个接线盒，可以通过将BNC连接器下方的相应开关移动到FS位置来测量浮动信号。此外，这接线盒也可以测量以地为基准的信号。对于以地为参考的信号，将用于A通道的BNC连接器下方的开关移动到GS位置。该设备配有15个BNC连接器，并有一个68针SCSI插头l/O连接器。前面板BNC连接器可用于连接Al %3C..7%3E信号至E/M/S系列DAQ设备。用户1和用户2BNC连接器使用户能够将BNC连接器用于用户选择的数字或定时I/O信号。用户1和用户2BNC连接器连接到用户1和用户2弹簧端子。NI设备重12.1盎司，尺寸为7.5×4.125×1.38英寸。在物理维度上。它的推荐工作温度范围为O至70℃C，储存温度范围为-55至125℃。
BNC-2110
NI BNC-2110 control module, desktop mounted wiring board. This junction box provides connections for 68 pin, female SCSl to 1 pin, female BNC (quantity 15), 30 pin, and female spring terminals. This BNC-2110 is designed to work with various national instrument companies for multifunctional input/output and analog output devices. This BNC-2110 helps simplify the connection of analog signals and some digital signals to DAQ devices. With this junction box, you can achieve better measurement integrity because BNC-2110 comes with a shielded housing. Desktop installation and DIN rail installation configurations are both possible shielded junction boxes. This device runs using NI-DAQmx driver software, which is compatible with software packages such as LabVIEW, LabWindows/CVI, or Measurement Studio. You can configure device hardware using Measurement and Automation Browser (MAX) tools. BNC-2110 can be used in 100 pin or 68 pin E/M/S series or 68 pin NI-672x, Nl-671x, and N-673x analog output (AO series) DAQ devices. This BNC National Instrument-2110 is widely used in demanding production, testing, and laboratory environments.
BNC-2110
This BNC-2110 is only used for differential analog input signals. With this junction box, the floating signal can be measured by moving the corresponding switch below the BNC connector to the FS position. In addition, this junction box can also measure signals based on ground. For signals referenced by ground, move the switch below the BNC connector for channel A to the GS position. The device is equipped with 15 BNC connectors and a 68 pin SCSI plug l/O connector. The front panel BNC connector can be used to connect Al% 3C 7% 3E signal to E/M/S series DAQ device. User 1 and User 2 BNC connectors enable users to use BNC connectors for digital or timed I/O signals of their choice. Connect the BNC connectors of user 1 and user 2 to the spring terminals of user 1 and user 2. The NI device weighs 12.1 ounces and measures 7.5×4.125×1.38 inches in size. On the physical dimension. Its recommended operating temperature range is O to 70 ℃ C, and its storage temperature range is -55 to 125 ℃.
There are no reviews yet.