REXROTH DKC02.3-040-7-FW 驱动控制器模块作为Indramat DKC系列的一部分，DKC02.3-040-7-FW是力士乐博世生产的数字驱动控制器。DKC02.3-040-7-FW 驱动控制器是 ECODRIVE03 驱动套件的一部分。ECODRIVE03 是一种智能自动化系统，具有适用于单轴和多轴控制任务的卓越功能。ECODRIVE 驱动器有多种变体，包括 ECODRIVE01、ECODRIVE03 和 ECODRIVE Cs。每个驱动器系列还具有不同的控制接口，包括并行，SERCOS，Profibus，模拟，CANopen或Interbus。ECODRIVE03固件可以针对某些应用运行同步和异步电机。
DKC02.3-040-7-FW
DKC02.3-040-7-FW 是 02 系列 3 版控制器。DKC02.3-040-7-FW 的额定电流为 40 A，而直流母线标称电压为 DC 700 V。此特定驱动器使用 SERCOS 接口进行命令通信。此驱动器上的固件在出厂时分配，性质未指定。如有必要，可以拆卸和更换固件编程模块。编程模块包含参数模块和固件模块。参数模块用于用户特定的参数，而固件模块用于特定于单元的固件。与某些DKC同类产品不同，此特定驱动器控制器不具有特定的固件版本。如前所述，DKC02.3-040-7-FW使用SERCOS或串行实时通信系统接口。SERCOS接口有两个光纤连接，用于连接到更高级别的控制器。该驱动控制器非常适合具有多轴系统的机器。
DKC02.3-040-7-FW
The REXROTH DKC02.3-040-7-FW drive controller module is part of the Indramat DKC series, and the DKC02.3-040-7-FW is a digital drive controller produced by Rexroth Bosch. The DKC02.3-040-7-FW drive controller is part of the ECODRIVE03 drive kit. ECODRIVE03 is an intelligent automation system with excellent functionality suitable for single axis and multi axis control tasks. There are various variants of ECODRIVE drives, including ECODRIVE01, ECODRIVE03, and ECODRIVE Cs. Each drive family also has different control interfaces, including parallel, SERCOS, Profibus, analog, CANopen, or Interbus. ECODRIVE03 firmware can run synchronous and asynchronous motors for certain applications.
DKC02.3-040-7-FW
DKC02.3-040-7-FW is a version 3 controller for the 02 series. The rated current of DKC02.3-040-7-FW is 40 A, while the nominal voltage of the DC bus is DC 700 V. This specific drive uses the SERCOS interface for command communication. The firmware on this drive is assigned at the factory and the nature is not specified. If necessary, the firmware programming module can be removed and replaced. The programming module includes parameter modules and firmware modules. The parameter module is used for user specific parameters, while the firmware module is used for unit specific firmware. Unlike some DKC similar products, this specific drive controller does not have a specific firmware version. As mentioned earlier, DKC02.3-040-7-FW uses SERCOS or serial real-time communication system interfaces. The SERCOS interface has two fiber optic connections for connecting to higher-level controllers. This drive controller is very suitable for machines with multi axis systems.
DKC02.3-040-7-FW
There are no reviews yet.