IS220PDIAH1B可与各种GE端子板结合使用。这些设备中的许多已被OEM置于传统状态，制造商可能不再提供这些设备,IS220PDIAH1B获准用于危险场所。它是与一个可选的辅助板一起建造的。可选的辅助板将用螺钉插入到AEPA的支架上。如果辅助板通过左上角的两个连接器连接到主模块上。两个连接器为公连接器。有许多集成电路包括但不限于三针母插头和两个母插头。 PDIA I/O可以与许多不同的端子板配对，包括IS20OSTCIH1A和2A、IS20OSTCIHB8A、 ls2OOTBCIH2C或H4C.IS400TBCIH2C、IS400STCIH1A或2A或IS40OSTCIH8A。
IS220PTURH1B
IS22OPDIAH1B /O组件的额定电压为24.0 VDC，最大额定值为24.0 VDC。触点输入的最大额定电压为32 VDC。该装置被UL认证用于非危险和危险场所。请参阅所有不同等级和区域UL标记的文档。IS22OPDIAH1B设计用于-30至+65摄氏度环境温度之间的温度。关于此模拟输出模块的其他信息可通过GE的原始文档找到。这些通常是配电板，是Mark Vle Speedtronic系统的一部分。
IS220PTURH1B
IS220PDIAH1B can be used in conjunction with various GE terminal boards. Many of these devices have been placed in a traditional state by OEMs, and manufacturers may no longer provide these devices. IS220PDIAH1B is approved for use in hazardous locations. It is built together with an optional auxiliary board. The optional auxiliary board will be inserted into the AEPA bracket with screws. If the auxiliary board is connected to the main module through the two connectors in the upper left corner. The two connectors are male connectors. There are many integrated circuits including but not limited to three pin female plugs and two female plugs. PDIA I/O can be paired with many different terminal boards, including IS20OSTCIH1A and 2A, IS20OSTCIHB8A, ls2OOTBIH2C or H4C. IS400TBCIH2C, IS400STCIH1A or 2A, or IS40OSTCIH8A.
IS220PTURH1B
The rated voltage of the IS22OPDIAH1B/O module is 24.0 VDC, with a maximum rated value of 24.0 VDC. The maximum rated voltage of the contact input is 32 VDC. This device is UL certified for use in non hazardous and hazardous locations. Please refer to all documents for UL markings of different levels and regions. IS22OPDIAH1B is designed for temperatures between -30 and+65 degrees Celsius ambient temperatures. Additional information about this analog output module can be found in GE’s original documentation. These are usually distribution boards and are part of the Mark Vle Speedtronic system.
There are no reviews yet.