ABB UFC911B108是一个AO处理模块，可用于自动化设备。模块接收来自传感器的模拟信号，并将其转换成可供系统处理的数字信号。该UFC911B108有一个高性能的处理器，快速，准确的信号处理允许。该UFC911B108可用于控制速度和电机的位置，调节温度和压力，并监测，如流量和水平的各种参数。 该UFC911B108也可用于执行对信号数据的数学计算和逻辑运算。该TU845MTU可以有多达I/O 8通道和2+2处理电压连接。每个通道有两个L/0连接和一个ZP连接。输入信号通过单独的分流棒TY801连接。分流棒用于选择电压和电流输入。最大额定电压为50V，最大额定电流为2A。
UFC911B108
MTU分配两个Module Bus，一个给每个I/0模块，另一个MTU。它还通过将输出位置信号转移到下一个MTU来生成正确的I/O模块地址。它有一个机械锁问，将MTU锁定在DIN导轨上四个机械键，每个I/0模块两个，用于为不同类型的I/0模块配置MTU。这只是一种机械配置，不会影响MTU或1/0模块的功能。每把钥匙有六个位置，总共有36种不同的配置.特点和优势：使用双线连接和现场电源分配完成I/O模块的安装。多达8个通道的现场信号和过程电源连接连接到两个Module By和/o模块机械键控可防止插入错误的I/O模块接地用DIN导轨的闭锁装置。
UFC911B108
ABB UFC911B108 is an AO processing module that can be used in automation equipment. The module receives analog signals from sensors and converts them into digital signals that can be processed by the system. The UFC911B108 has a high-performance processor that allows for fast and accurate signal processing. The UFC911B108 can be used to control speed and motor position, adjust temperature and pressure, and monitor various parameters such as flow and level. The UFC911B108 can also be used to perform mathematical and logical calculations on signal data. The TU845MTU can have up to 8 I/O channels and 2+2 processing voltage connections. Each channel has two L/0 connections and one ZP connection. The input signal is connected through a separate splitter rod TY801. The splitter bar is used to select voltage and current inputs. The maximum rated voltage is 50V and the maximum rated current is 2A.
UFC911B108
The MTU allocates two Module Buses, one for each I/O module and the other for the MTU. It also generates the correct I/O module address by transferring the output position signal to the next MTU. It has a mechanical lock that locks the MTU onto the DIN rail with four mechanical keys, two for each I/0 module, used to configure MTUs for different types of I/0 modules. This is only a mechanical configuration and will not affect the functionality of the MTU or 1/0 module. Each key has six positions and a total of 36 different configurations. Features and advantages: It uses dual wire connection and on-site power distribution to complete the installation of I/O modules. Up to 8 channels of on-site signal and process power connections are connected to two Module By and/o modules. Mechanical keying prevents incorrect insertion of I/O modules. A DIN rail locking device is used for grounding the I/O module
UFC911B108
There are no reviews yet.