WOODWARD 9907-1106 易于与第三方辅助设备集成作为单一系统中的完整解决方案,HazardWatch FX-12系统包括:独立的本地火灾和气体报警面板,带触摸屏操作界面;根据NFPA 72,冗余电源支持火气系统;易于与第三方辅助设备集成,如喇叭、信号灯和灭火系统;以及FM认证的以太网/IP系统与DCS或ESD系统的通信,带可选Modbus。HazardWatch FX-12每个报警面板最多可容纳12个现场设备,最多可连接12个面板。面板安装在NEMA 12级外壳的墙壁上。用户连接在安装在轨道上的“摆动连杆”上,带有按输入/输出类型组织的端子板。PLC处理器和触摸屏配有非易失性存储器。HazardWatch FX-12具有高度的通用性,可支持全方位的火灾、火焰和气体探测需求,与MSA的业界领先的火焰和气体传感技术兼容。
可用的火焰探测器型号包括通用监视器多光谱红外(MSIR) FL4000H、紫外/红外光学FL500等。对于可燃或有毒气体和缺氧(O2)监控,HazardWatch FX-12支持Ultima X5000和普通监视器S5000气体探测器。此外,对于储罐或管道泄漏监测,可提供Observeri超声波气体泄漏(UGLD)检测器,对于工厂或区域周边监测,支持IR5500或Senscient ELDS开路气体检测器。对于现场或云中的安全监控,HazardWatch FX-12的可选FieldServer网关支持通过BACnet、EtherNet/IP、Modbus、SNMP和许多其他协议全天候共享关键操作数据。MSA的远程监控和通知解决方案通过通知SCADA系统现场发生的事件,帮助支持火灾报警面板和HazardWatch FX-12火气系统。
WOODWARD 9907-1106 is easy to integrate with third-party auxiliary equipment as a complete solution in a single system. The HazardWatch FX-12 system includes: an independent local fire and gas alarm panel with a touch screen operation interface; According to NFPA 72, redundant power supplies support fire and gas systems; Easy to integrate with third-party auxiliary devices such as speakers, signal lights, and fire suppression systems; And communication between FM certified Ethernet/IP system and DCS or ESD system, with optional Modbus. The HazardWatch FX-12 can accommodate up to 12 on-site devices per alarm panel and can connect up to 12 panels. The panel is installed on the wall of a NEMA Class 12 enclosure. The user is connected to a “swing link” installed on the track, with a terminal board organized by input/output type. The PLC processor and touch screen are equipped with non-volatile memory. The HazardWatch FX-12 has a high degree of versatility, supporting comprehensive fire, flame, and gas detection needs, and is compatible with MSA’s industry-leading flame and gas sensing technology.
The available flame detector models include Universal Monitor Multi Spectral Infrared (MSIR) FL4000H, UV/IR Optical FL500, etc. For monitoring flammable or toxic gases and oxygen deficiency (O2), the HazardWatch FX-12 supports Ultima X5000 and regular monitor S5000 gas detectors. In addition, for tank or pipeline leakage monitoring, Observi Ultrasonic Gas Leakage (UGLD) detectors can be provided. For monitoring around factories or areas, IR5500 or Sensor ELDS open circuit gas detectors are supported. For on-site or cloud security monitoring, the optional FieldServer gateway of the HazardWatch FX-12 supports 24/7 sharing of critical operational data through BACnet, EtherNet/IP, Modbus, SNMP, and many other protocols. MSA’s remote monitoring and notification solution helps support the fire alarm panel and the HazardWatch FX-12 fire and gas system by notifying the SCADA system of on-site events.
There are no reviews yet.