AMAT 0100-71229 张力测量模块工作站的复装、调试与投运工作站的主机、CRT或大屏幕显示器、打印机、键盘、鼠标等均检修结束后进行复装。按原始记录以及修前标记安装、连接。检查接线无误，送电检查各功能，如有故障，则应情况进行处理。如无故障则可送电，待DCS系统检修结束进行在线测试如软件有问题可由备份恢复。检查。自检应显示工作站工作正常，数据通信正常、操作界面正常、参数变化正常、各功能操作、应答正常正常DPU组态、报表、趋势、追忆、一览、报警、SOE、网络操作、MIS通信、时钟校对、图形组态、WINDOWS/WINNT操作等，若有问题及时处理。重新设置密码投入运行。
0100-71229
0100-71229
The reinstallation, debugging, and operation of the AMAT 0100-71229 tension measurement module workstation shall be carried out after the maintenance of the host, CRT or large screen display, printer, keyboard, mouse, etc. of the workstation is completed. Install and connect according to the original records and pre repair markings. Check the wiring is correct, and check the various functions of the power supply. If there is a fault, it should be dealt with according to the situation. If there are no faults, power can be supplied. Online testing will be conducted after the maintenance of the DCS system is completed. If there are any software problems, backup can be used to restore. Check. The self check should display that the workstation is working normally, with normal data communication, normal operation interface, normal parameter changes, normal operation and response of various functions. DPU configuration, reports, trends, reminders, overview, alarms, SOEs, network operations, MIS communication, clock calibration, graphic configuration, WINDOWS/WINNT operation, etc. should be handled in a timely manner if there are any problems. Reset the password and put it into operation.
There are no reviews yet.