DDC4-10-40020 伺服放大驱动器是具有多通道的精密互补金属氧化物半导体CMOS开关。DDC4-10-40020 伺服放大驱动器是2：1，单极双掷（SPDT）配置，具有三个独立控制通道和一个EN引脚来启用或禁用所有三个开关。DDC4-10-40020 伺服放大驱动器包含四个独立控制的SPDT开关。宽工作电源1.08V至5.5V，或土2.75V双电源，允许在从医疗设备到工业系统的广泛应用中使用。该器件支持源Sx和漏极Dx引脚上的双向模拟和数字信号，范围从VSS到VDD。对于单电源应用，VSS必须连接到GND。
DDC4-10-40020
所有逻辑输入均具有1.8V逻辑兼容阈值，确保在有效电源电压范围内工作时TTL和CMOS逻辑兼容。故障安全逻辑电路允许在电源引脚之前施加控制引脚上的电压，保护设备免受潜在的损坏。DDC4-10-40020 伺服放大驱动器是精密开关和多路复用器系列的一部分。这些设备具有非常低的开关泄漏电流和低电荷注入，使它们能够用于高精度测量应用。低电源电流为8 nA，可用于便携式应用。
DDC4-10-40020
The DDC4-10-40020 servo amplifier driver is a precision complementary metal oxide semiconductor CMOS switch with multiple channels. The DDC4-10-40020 servo amplifier driver is a 2:1, single pole double throw (SPDT) configuration with three independent control channels and one EN pin to enable or disable all three switches. The DDC4-10-40020 servo amplifier driver includes four independently controlled SPDT switches. A wide working power supply ranging from 1.08V to 5.5V, or a dual power supply ranging from 2.75V, is allowed for use in a wide range of applications from medical equipment to industrial systems. This device supports bidirectional analog and digital signals on the source Sx and drain Dx pins, ranging from VSS to VDD. For single power applications, VSS must be connected to GND.
DDC4-10-40020
All logic inputs have a 1.8V logic compatibility threshold, ensuring compatibility between TTL and CMOS logic when operating within the effective power supply voltage range. The fault safe logic circuit allows the voltage on the control pin to be applied before the power pin, protecting the device from potential damage. The DDC4-10-40020 servo amplifier driver is part of the precision switch and multiplexer series. These devices have very low switch leakage current and low charge injection, making them suitable for high-precision measurement applications. The low power current is 8 nA and can be used for portable applications.
DDC4-10-40020
There are no reviews yet.