FOXBORO FBM215 P0917TQ 处理器模块它采用的创新的连接技术保证了编码器可以简单快速的安装连接。适用于您的重载应用由于采用了新型的“重载安全锁”轴承结构设计，实现了非常高的负载能力，轴向300N，径向400N。具有从 -40℃ 到 +100℃ 的使用温度范围，IP66 的防护等级和抗海水材料。使得编码器可以在极其恶劣的环境中工作。平键轴可以确保在应用中快速可靠的配合安装。通过机械速度开关来保证超速时的安全性。简单快速安装创新的插入式弹簧端子接口，大大简化了电缆连接工艺，并保证了很高的安全水平。由于接线盒可以进行180°的旋转，这增加了接线时的更多的出线应用可能性。作为标准配置，具有很高的分辨率和多种开关速度可选项。
FBM215 P0917TQ
FBM215 P0917T处理器模块可附带的机械超速开关或双增量型编码器该款是增量型编码器的一个超强壮的系列新品，该系列目前有3种版本：单体增量型编码器、带超速开关增量型编码器、双增量型编码器。H100单体增量型编码器欧标 RE0444 型法兰φ11 x 30 mm，带平键轴输出电路与电源电压：RS422（带反相信号），5 … 30 V DC推挽（带反相信号），10 … 30 V DC分辨率可达 3600 pprH100带机械超速开关的编码器超速开关的附加功能：开关速度：750、1000、2000、3000、4000 rpm（其他开关速度可应请而定）开关精度：当 100rad/s2时，为 ± 4%设计，该款编码器非常适用于重工业领域的应用，比如在钢铁厂和起重机上。另外它还采用了耐磨材料，具有宽泛的使用温度范围和很高的防护等级， 这使得它即使在*恶劣的环境条件下也可以可靠的正常工作。
FBM215 P0917TQ
The FOXBORO FBM215 P0917TQ processor module adopts innovative connection technology, ensuring that the encoder can be easily and quickly installed and connected. Suitable for your heavy-duty application, due to the adoption of a new “heavy-duty safety lock” bearing structure design, it achieves very high load capacity, with an axial force of 300N and a radial force of 400N. It has a usage temperature range from -40 ℃ to+100 ℃, an IP66 protection level, and seawater resistant materials. Enable the encoder to operate in extremely harsh environments. The flat key shaft can ensure fast and reliable installation in applications. Ensure safety during overspeed by using mechanical speed switches. The innovative plug-in spring terminal interface for simple and fast installation greatly simplifies the cable connection process and ensures a high level of safety. Due to the 180 ° rotation of the junction box, it increases the possibility of more outgoing wire applications during wiring. As a standard configuration, it has high resolution and multiple switch speed options.
FBM215 P0917TQ
The FBM215 P0917T processor module can come with mechanical overspeed switches or dual incremental encoders. This is a super strong new series of incremental encoders, which currently have three versions: single incremental encoders, incremental encoders with overspeed switches, and dual incremental encoders. H100 single incremental encoder European standard RE0444 flange φ 11 x 30 mm, with flat key shaft output circuit and power supply voltage: RS422 (with reverse signal), 5 30 V DC push-pull (with reverse signal), 10 30 V DC resolution up to 3600 pprH100 encoder with mechanical overspeed switch Additional features of overspeed switch: switch speed: 750, 1000, 2000, 3000, 4000 rpm (other switch speeds can be requested) Switch accuracy: designed for ± 4% when 100rad/s2, this encoder is not commonly used in heavy industry applications, such as in steel plants and cranes. In addition, it also uses wear-resistant materials, with a wide temperature range and high protection level, which allows it to work reliably even in harsh environmental conditions.
There are no reviews yet.