B&R 7DO135.70复位开关和信号器-A小前面板上的按钮开关将重置VMIVME-7697。如果系统控制器启用系统重置*也将在VMEbus上生成。五前面板上的LED可见：+5 V电源，状态为VMEbus系统故障、IDE活动、LAN活动和LAN模式（10或100MHz模式）。还需要一个小型扬声器包括在VMIVME-7697上，以提供PC/AT声音outputPMC扩展站点-VMIVME-7697支持IEEE P1386通用夹层卡规范具有5V PCI夹层卡扩展站点。这种扩展该功能允许第三方设备与VMIVME-7697。
7DO135.70
以下是部分市售产品列表PMC模块：光纤通道反思性记忆模拟和数字I/O高速串行和并行I/O网络适配器：FDDI、ATM、10BaseT、100BaseTX以太网，快速以太网PMC到PC卡适配器MIL-STD-1553总线接口SRAM闪光固态磁盘数据采集卡SCSI-2适配器并行链路八进制DSP四方SIOGPIB传真/调制解调器第二以太网PMC至PMC扩展器有关更多信息，请联系VMIC第三方PMC模块和兼容性。
7DO135.70
The B&R 7DO135.70 reset switch and the button switch on the signal-A small front panel will reset VMIVME-7697. If the system controller enables system reset *, it will also be generated on VMEbus. The LEDs on the five front panels are visible:+5 V power supply, with VMEbus system failure, IDE activity, LAN activity, and LAN mode (10 or 100MHz mode). A small speaker is also required to be included on VMIVME-7697 to provide PC/AT sound outputPMC expansion site – VMIVME-7697 supports IEEE P1386 universal mezzanine card specification with 5V PCI mezzanine card expansion site. This extension allows third-party devices to work with VMIVME-7697.
7DO135.70
The following is a list of some commercially available PMC modules: Fiber Channel Reflective Memory Analog and Digital I/O High Speed Serial and Parallel I/O Network Adapters: FDDI, ATM, 10BaseT, 100BaseTX Ethernet, Fast Ethernet PMC to PC card adapter MIL-STD-1553 bus interface SRAM flash solid-state disk data acquisition card SCSI-2 adapter parallel link octal DSP quad SIOGPIB fax/modem Second Ethernet PMC to PMC extender For more information, please contact VMIC third-party PMC module and compatibility.
There are no reviews yet.