IC693APU302 双轴定位模块 可以提供高性能电子传动装置

IC693APU302 双轴定位模块是一种主要用于运动和位置控制的组件。它能够控制两个轴或两个伺服电机，以实现运动和位置的同时控制。这种模块是一个智能模块，可以配置为在标准和从动模式下运行。在标准模式下，模块将控制集成到PLC存储器中的用户逻辑中，以实现高性能控制。而在从动模式下，模块为主应用和从应用提供高性能电子传动装置。IC693APU302 模块的前面板通过9针D壳连接器安装有两个运动轴端口，以及两个25针高密度端口，用于容纳伺服连接。定制电缆可用于建立与模块的连接，但也可获得预组装电缆，以实现更快的接线和端接。此外，双轴定位模块可以与系列90-30 PLC一起使用，并使用Motion编程器软件包或最低软件版本1.1的VersaPro软件开发的配置进行下载。IC693APU302但不同制造商的双轴定位模块可能会有所不同，具体细节应参考相关制造商的文档和指南。

IC693APU302

The IC693APU302 dual axis positioning module is a component mainly used for motion and position control. It can control two axes or two servo motors to achieve simultaneous control of motion and position. This module is an intelligent module that can be configured to operate in both standard and slave modes. In standard mode, the module integrates control into the user logic in the PLC memory to achieve high-performance control. In the passive mode, the module provides high-performance electronic transmission devices for both the primary and secondary applications. The front panel of the IC693APU302 module is equipped with two motion axis ports and two 25 pin high-density ports through 9-pin D-shell connectors to accommodate servo connections. Customized cables can be used to establish connections with modules, but pre assembled cables can also be obtained for faster wiring and termination. In addition, the dual axis positioning module can be used in conjunction with the series 90-30 PLCs and can be downloaded using the Motion programmer software package or the configuration developed by VersaPro software with a minimum software version 1.1. IC693APU302, however, the dual axis positioning modules from different manufacturers may vary, and specific details should refer to the relevant manufacturer’s documentation and guidelines.