PMC-211050000000010000 电力控制模块 可以解析电力参数并显示

PMC-211050000000010000 电力控制模块是一种用于处理数据和发出控制指令的模块。它首先接收并处理用户信息，然后判断是否有电器在使用。如果有电器在使用，电力控制模块会不断发送电力参数报文到处理模块，解析得到电力参数并显示，封装成报文并发送到终端。终端可以回发报文来控制通电与断电。反之，在设定时间之后，电力控制模块会断电并返回到初始刷卡系统状态。在硬件方面，PMC-211050000000010000 电力控制模块需要ARM芯片板、RFID刷卡部件、电力参数测量传感器、继电器、LCD显示屏、串口线等硬件材料。ARM芯片板作为系统运行核心平台，将其他硬件材料整合到一起，同时协作完成需要执行的功能。RFID刷卡部件分为标签与阅读器，阅读器连接到芯片板，标签则随身携带。

PMC-211050000000010000

The PMC-21105000000010000 power control module is a module used for processing data and issuing control instructions. It first receives and processes user information, and then determines if there are any appliances in use. If there are electrical appliances in use, the power control module will continuously send power parameter messages to the processing module, parse and display the power parameters, package them into messages, and send them to the terminal. The terminal can send back messages to control power on and off. On the contrary, after the set time, the power control module will power off and return to the initial card swiping system state. In terms of hardware, the PMC-21105000000000 power control module requires hardware materials such as ARM chip board, RFID card swiping component, power parameter measurement sensor, relay, LCD display screen, serial port cable, etc. The ARM chip board serves as the core platform for system operation, integrating other hardware materials together and collaborating to complete the required functions. The RFID card swiping component is divided into a tag and a reader. The reader is connected to the chip board, and the tag is carried with you.