GE通用电气触摸屏 IC693MDL730

IC693MDL730是一款输出模块，具体为Fanuc的GE IC693MDL730系列90-30输出模块2安培正逻辑8点。这款模块广泛应用于化工、石油、建材、航天、电气等领域，具备高精度、快速响应和低噪声等性能特点。

IC693MDL730是一个正逻辑输出模块，属于通用电气发那科公司的90-30系列可编程逻辑控制器(PLC)产品系列，现隶属艾默生自动化公司。该模块在单组中具有八(8)个离散输出通道，提供12-24 VDC的输出电压范围，纹波为+ 20%，-15%。每个通道提供每点2安培的输出电流；60摄氏度时每根保险丝2安培；50摄氏度时每根保险丝4安培。IC693MDL730在现场侧和逻辑侧之间提供高达1500伏的隔离。输出通道的浪涌电流额定值为9.4安培，持续10毫秒；最大输出电压降为12伏；最大关断状态漏电流为1 mA，每次转换的典型开关响应时间为2ms。该模块占用90-30基板的一个插槽，并与90-30系列五(5)或十(10)插槽基板的任何I/O插槽兼容。当所有输出均通电时，它的电流消耗为55 mA，来自背板上的5 VDC总线。IC693MDL730兼容各种电气负载，尤其是电机启动器、螺线管和指示器。外部电源必须连接到模块以提供操作电源。状态LED指示器安装在模块的前面板，包括熔断保险丝指示器、模块故障指示器和八(8)个通道指示器，分别分配给每个输出通道，描述每个输出点的运行状态。该模块带有一个可拆卸的端子板，以简化维护。

IC693MDL730 is an output module, specifically Fanuc’s GE IC693MDL730 series 90-30 output module with a 2-ampere positive logic 8-point. This module is widely used in fields such as chemical, petroleum, building materials, aerospace, electrical, etc., and has performance characteristics such as high precision, fast response, and low noise.
IC693MDL730 is a positive logic output module belonging to the 90-30 series programmable logic controller (PLC) product series of General Electric Fanuc, and is currently under the jurisdiction of Emerson Automation. This module has eight (8) discrete output channels in a single group, providing an output voltage range of 12-24 VDC with ripple of+20% and -15%. Each channel provides an output current of 2 amperes per point; At 60 degrees Celsius, each fuse is 2 amperes; Each fuse is 4 amperes at 50 degrees Celsius. IC693MDL730 provides up to 1500 volts of isolation between the field side and the logic side. The rated surge current of the output channel is 9.4 amperes for 10 milliseconds; The maximum output voltage drop is 12 volts; The maximum leakage current in the off state is 1 mA, and the typical switch response time for each transition is 2ms. This module occupies one slot on the 90-30 substrate and is compatible with any I/O slot on the 90-30 series five (5) or ten (10) slot substrate. When all outputs are powered on, its current consumption is 55 mA, coming from the 5 VDC bus on the backplane. IC693MDL730 is compatible with various electrical loads, especially motor starters, solenoids, and indicators. The external power supply must be connected to the module to provide operational power. The status LED indicator is installed on the front panel of the module, including a blown fuse indicator, module fault indicator, and eight (8) channel indicators, assigned to each output channel to describe the operating status of each output point. This module comes with a detachable terminal board to simplify maintenance.