GE PLC模块 IC693MDL940

IC693MDL940 是 GE-Fanuc 90-3- 系列可编程逻辑控制器 (PLC) 模块。该模块是一个继电器输出模块，设计有四 (4) 组，每组四 (4) 个输出通道，总共十六 (16) 个输出通道。该继电器输出模块的每个通道采用常开 (NO) 触点的形式，每个输出通道的最大电流容量为 2 安培先导负载，而每个公共端的最大输出容量为 4 安培，最小负载为 10 毫安。

每个输出通道的最大 OFF 到 ON 转换时间为 15 ms，ON 到 OFF 转换时间为 15 ms，最大浪涌电流容量为 5 A。该模块设计为组间 1500 伏和 500 伏的现场侧和逻辑侧隔离。该模块占用 90-30 机箱的单个插槽，背板上 5 伏总线的内部功耗为 7 mA(所有输出打开)，背板上的继电器 24V 总线的内部功耗为 135 mA(所有输出打开)。IC693MDL940 的额定工作电压为 24 伏直流、120/240 伏交流，而工作电压范围为 5 至 30VDC 和 5 至 250VAC、50/60 Hz。

IC693MDL940 可用于操作执行设备，例如指示灯、警报器、蜂鸣器、喇叭、接触器、继电器、电磁阀和其他兼容设备。每组可以以每组不同的电压范围操作。该模块配备有 LED 指示灯，可表示模块和各个通道的状态。

The IC693MDL940 is a GE-Fanuc 90-3- series programmable logic controller (PLC) module. This module is a relay output module designed with four (4) groups of four (4) output channels each, for a total of sixteen (16) output channels. Each channel of this relay output module is in the form of a normally open (NO) contact with a maximum current capacity of 2 amps pilot load per output channel and a maximum output capacity of 4 amps per common with a minimum load of 10 milliamps.

Each output channel has a maximum OFF to ON transition time of 15 ms, an ON to OFF transition time of 15 ms, and a maximum inrush current capacity of 5 A. The module is designed to provide field and logic side isolation between groups of 1500 and 500 volts. The module occupies a single slot in the 90-30 chassis and has an internal power consumption of 7 mA for the 5-volt bus on the backplane (all outputs open) and 135 mA for the relay 24-volt bus on the backplane (all outputs open). the IC693MDL940 is rated for 24 volts dc, 120/240 volts a.c., and has an operating voltage range of 5 to 30 volts dc, 5 to 250 volts ac, 50/60 H. The IC693MDL940 is rated for 24 volts dc, 120/240 volts ac, and has an operating voltage range of 5 to 30 volts dc and 5 to 250 volts ac. The IC693MDL940 is rated for 24 VDC, 120/240 VAC and has an operating voltage range of 5 to 30 VDC and 5 to 250 VAC, 50/60 Hz.

The IC693MDL940 can be used to operate actuating devices such as indicators, sirens, buzzers, horns, contactors, relays, solenoids, and other compatible devices. Each group can be operated at a different voltage range per group. The module is equipped with LEDs to indicate the status of the module and individual channels.