GE IC693ALG222模拟量输入卡件
IC693ALG222 中的通道数量可以是单端（1 至 16 通道）或差分（1 至 8 通道）。该模块的电源要求为来自 5V 总线的 112mA，还需要来自 24V 直流电源的 41V 电源来为转换器供电。两个LED指示灯指示用户电源的状态以及模块的状态。这两个 LED 分别是 MODULE OK（模块正常）和 POWER SUPPLY OK（电源正常），前者显示有关通电的状态，后者检查电源是否高于所需的水平。IC693ALG222 模块可使用逻辑主编程软件或通过手持式编程进行配置。如果用户选择通过手持编程对模块进行编程，则他只能编辑活动通道，而不能编辑活动扫描通道。该模块使用%AI数据表来记录模拟信号，以供可编程逻辑控制器使用。
The number of channels in the IC693ALG222 can be single-ended (1 to 16 channels) or differential (1 to 8 channels). The module’s power requirements are 112mA from the 5V bus and a 41V supply from a 24V DC power supply to power the converter. Two LEDs indicate the status of the user power supply as well as the status of the module. The two LEDs are MODULE OK, which indicates the status of the power supply, and POWER SUPPLY OK, which checks that the power supply is above the required level.The IC693ALG222 module can be configured using the Logic Master Programming Software or through handheld programming. If the user chooses to program the module via handheld programming, he can only edit the active channel, not the active scan channel. The module uses the %AI data sheet to record analog signals for use by the programmable logic controller.
如果要订货可以联系我们，电话：+86 17350011025 邮箱：1713556114@qq.com
There are no reviews yet.