EMERSON A6210 推力位置、差胀和棒位置监视器 成都阳光熹禾

产品细节说明:EMERSON A6210 推力位置、差胀和棒位置监视器

1. 推力位置监测：
   • 精确监控推力位置，并通过将测量的轴向位置与报警设置点（驱动报警和继电器输出）进行比较，可靠地提供机械保护。
   • 适用于叶轮机械等需要精确控制推力位置的场景，能够在40毫秒或更短的时间内检测到突然和小的轴向运动，以减少或避免转子与壳体的接触。
2. 差动膨胀监测：
   • 由于涡轮机启动时热条件的变化，壳体和转子都会增大。差动膨胀提供了壳体上安装的位移传感器与轴上的传感器目标之间的相对差的测量。
   • 如果壳体和轴以大致相同的速率增长，则膨胀差保持接近所需的零值。这有助于及时发现并调整热膨胀不均匀导致的问题。
3. 杆位置监测：
   • 可配置为平均棒跌落模式，用于监控往复式压缩机中的滑带磨损。通过安装至少一个位移传感器来测量活塞杆的位置，当活塞下降时及时发出通知，指示滑带磨损情况。
   • 用户可以设置自动跳闸的关机保护阈值，以防止因滑带磨损导致的机器损坏或故障。

A6210

产品详情参数:EMERSON A6210 推力位置、差胀和棒位置监视器

• 双通道、3U尺寸、单插槽插入式模块：将机柜空间要求比传统的四通道、6U尺寸卡减少一半。
• 符合API670和API618标准：热插拔模块设计，便于维护和更换。
• 前后缓冲和比例输出：提供0/4_{20mA输出和0}10V输出，满足不同信号需求。
• 自检设施：包括监测硬件、电源输入、硬件温度等，确保设备的可靠运行。
• 内置软件线性化：便于安装后的传感器调整，提高测量精度。

EMERSON A6210 应用领域:

EMERSON A6210监视器广泛应用于石油、化工、冶金、电力等行业的各种机械设备中，如叶轮机械、涡轮机、往复式压缩机等。它通过实时监测和精确控制，为设备的安全运行和高效生产提供有力支持。EMERSON A6210是一款功能强大、技术先进的推力位置、差胀和棒位置监视器。它通过精确测量和实时分析，为机械设备的安全运行提供有力保障。无论是在推力位置监测、差动膨胀监测还是杆位置监测方面，都具有出色的表现。

Product Details: EMERSON A6210 Thrust Position, Differential Expansion, and Rod Position Monitor
Thrust position monitoring:
Accurately monitor the thrust position and provide reliable mechanical protection by comparing the measured axial position with the alarm set points (drive alarm and relay output).
Suitable for scenarios such as turbomachinery that require precise control of thrust position, it can detect sudden and small axial movements in 40 milliseconds or less to reduce or avoid contact between the rotor and the housing.
Differential expansion monitoring:
Due to changes in thermal conditions during turbine start-up, both the casing and rotor will increase in size. Differential expansion provides a measurement of the relative difference between the displacement sensor installed on the housing and the sensor target on the shaft.
If the shell and shaft grow at roughly the same rate, the expansion difference remains close to the required zero value. This helps to detect and adjust problems caused by uneven thermal expansion in a timely manner.
Pole position monitoring:
Can be configured as an average rod drop mode for monitoring slip belt wear in reciprocating compressors. By installing at least one displacement sensor to measure the position of the piston rod, timely notifications are issued when the piston descends, indicating the wear of the sliding belt.
Users can set a shutdown protection threshold for automatic tripping to prevent machine damage or malfunction caused by sliding belt wear.
Product Details Parameters: EMERSON A6210 Thrust Position, Differential Expansion, and Rod Position Monitor
Dual channel, 3U size, single slot plug-in module: reduces cabinet space requirements by half compared to traditional four channel, 6U size cards.
Compliant with API670 and API618 standards: Hot swappable module design for easy maintenance and replacement.
Front and rear buffering and proportional output: Provides 0/420mA output and 010V output to meet different signal requirements.
Self checking facilities: including monitoring hardware, power input, hardware temperature, etc., to ensure the reliable operation of the equipment.
Built in software linearization: facilitates sensor adjustment after installation and improves measurement accuracy.
EMERSON A6210 application areas:

The EMERSON A6210 monitor is widely used in various mechanical equipment in industries such as petroleum, chemical, metallurgy, and power, such as turbomachinery, turbines, reciprocating compressors, etc. It provides strong support for the safe operation and efficient production of equipment through real-time monitoring and precise control. EMERSON A6210 is a powerful and technologically advanced thrust position, differential expansion, and rod position monitor. It provides strong guarantees for the safe operation of mechanical equipment through precise measurement and real-time analysis. It has excellent performance in thrust position monitoring, differential expansion monitoring, and rod position monitoring.

其他型号推荐：EMERSON A6210 推力位置、差胀和棒位置监视器