●PAC8000 /O是完全模块化的I/O解决方案，适用于通用和危险区域应用。它提供各种I/O功能，并具有开放式架构,通过选择适当类型的总线接口模块(IM)或控制器,允许与各种不同的现场总线进行通信。
●现场端子(每个I/O模块一个)卡在载体 上，无需额外的端子或连接即可接受现场接线。如果在现场损坏，可以很容易地更换它们。全面的机械键控系统确保了设备的安全性。
●载体通过安装在平板或T或G截面DIN导轨上形成PAC8000s的物理和电气主干。它们支持并互连BIM或控制器、电源、/O模块和现场终端， 并承载内部轨道总线的地址、数据和电源线
●2线、3线或4线变送器
●HART传递、采集和状态报告
●8914-PSAC需要24 VDC总线现场电源
8810-HI-TX
8810-HI-TX
PAC8000/O is a fully modular I/O solution suitable for general and hazardous area applications. It provides various I/O functions and has an open architecture, allowing communication with various field buses by selecting the appropriate type of Bus Interface Module (IM) or controller.
● Field terminals (one per I/O module) are stuck on the carrier and can accept field wiring without the need for additional terminals or connections. If damaged on site, they can be easily replaced. A comprehensive mechanical keying system ensures the safety of the equipment.
The carrier forms a physical and electrical backbone of PAC8000s by installing it on a flat plate or T or G section DIN rail. They support and interconnect BIMs or controllers, power supplies,/O modules, and field terminals, and carry the address, data, and power cables of the internal track bus
● 2-wire, 3-wire, or 4-wire transmitters
● HART transmission, acquisition, and status reporting
8914-PSAC requires 24 VDC bus field power supply
8810-HI-TX
8810-HI-TX
There are no reviews yet.