通用电气的这些伺服阀端接板用于公司的Mark VI系统。Mark VI是用于管理I业燃气和蒸汽轮机系统的更先进的Speedtronic系统之- ;它已经使用了20多年。
IS200TSVOH1B使用屏障式接线端子。它们安装在一 个长板侧。 该板能够通过这两个l/O通道接受来自两个伺服电流源的输入。每个接线端子最多允许三个LVDT或LVDR反馈传感器附件(电路板总共六个)。这些传感器可以是高选、中选或低选。脉冲速率输入在2-14 kHz之间。如果您需要具有这些设置但使用盒式端子的电路板.参阅我们的DSVO板列表。IS200TSVOH1B的重量仅为2.0磅。由于增加了内部和外部装箱和衬垫以及防静电包装，该板在准备发货后会更重。我们建议在拆箱任何静电敏感组件时使用接地带。IS200TSV0H1B板可以运送到您的位置或在我们的位置领取
IS200TSVOH2B
IS200TSVOH2B
These servo valve termination plates from General Electric are used in the company’s Mark VI system. Mark VI is one of the more advanced Speedtronic systems used to manage gas and steam turbine systems in Industry I; It has been in use for over 20 years.
IS200TSVOH1B uses barrier type terminal blocks. They are installed on the side of a long board. The board can receive input from two servo current sources through these two l/O channels. Each wiring terminal allows a maximum of three LVDT or LVDR feedback sensor accessories (a total of six circuit boards). These sensors can be high selection, medium selection, or low selection. The pulse rate input is between 2-14 kHz. If you need a circuit board with these settings but using box terminals, please refer to our DSVO board list. The weight of IS200TSVOH1B is only 2.0 pounds. Due to the addition of internal and external packaging and padding, as well as anti-static packaging, the board will be heavier after preparation for shipment. We recommend using a grounding strap when unpacking any static sensitive components. The IS200TSV0H1B board can be shipped to your location or picked up at our location
IS200TSVOH2B
IS200TSVOH2B
专业销售世界各大电气品牌产品产品海外直接采购，正品库存，价格优惠售后保修，型号齐全，一样的产品，不一样的价格与服务。大量供应原装进口DCS系统配件，PLC系统配件。主营:ABB、GE发那科、Bentl本特利、Triconex英维思、Woodward伍德沃德、Foxboro福克斯波罗、Westinghouse西屋/Emerson艾默生、Reliance瑞恩、SchneiderModicon施耐德莫迪康、A-B、HIMA黑马、Motorola摩托罗拉、Kollmorgen科尔摩根Bosch/Rexroth/博世力上乐，NI,YOKOGAWA横河，等各大品牌的DCS系统配件，机器人系统配件，大型伺服系统停产备件。
IS200TSVOH2B
There are no reviews yet.