GE IS220PVIBH1A 振动监测器包

IS220PVIBH1A型号被设计为振动监测器包。PVIB 组的主要功能是在最多两个 I/O 以太网网络和一个振动端子板之间提供电气接口功能。该套件的主要组件是主处理器板，该板与大多数MK VIe分布式I / O包以及子板和采集板一起使用。

该包装上有 13 个通道，用于通过以下几种传感器类型收集和读取接近和振动信息：

速度计
地震的
近似器
加速度计

IS220PVIBH1A

传感器类型用于不同的通道，例如，加速度计仅用于通道一、通道二和通道三。 请注意，通道 220、1、<> 和 <> 只能用于支持邻近信号，而第 <> 个通道可以输入接近类型或键相信号类型。请注意，IS<>PVIBH<>A组上的 <> 个差分输入有一个 DAC（数字模拟转换器），用于偏置调整，可以使信号的直流成分无效，从而更好地使 A/D（模数）输入范围居中。

PVIB I/O 组具有处理器应用代码，用于可能包含允许电池组从单数或双以太网输入运行所需的所有逻辑代码。当通过两个以太网输入操作时，正确操作IS220PVIBH1A组所需的网络路径始终处于活动状态。如果由于任何原因任一网络出现故障，则不会对 I/O 包的操作造成任何类型的干扰，但将通过操作网络连接指示故障。

IS220PVIBH1A

The IS220PVIBH1A model is designed as a vibration monitor package. The main function of the PVIB group is to provide electrical interface functionality between up to two I/O Ethernet networks and one vibration terminal board. The main component of this kit is the main processor board, which is used in conjunction with most MK VIe distributed I/O packages, as well as sub boards and acquisition boards.
There are 13 channels on this packaging for collecting and reading proximity and vibration information through the following types of sensors:
Speedometer
Seismic
Approximator
Accelerometer

IS220PVIBH1A

The sensor type is used for different channels, for example, the accelerometer is only used for channels one, two, and three. Please note that channels 220, 1,<>, and<>can only be used to support adjacent signals, while the<>channel can input a proximity type or a keyphase signal type. Please note that the<>differential inputs on Group A of IS<>PVIBH<>have a DAC (Digital to Analog Converter) for bias adjustment, which can invalidate the DC component of the signal and better center the A/D (Analog to Digital) input range.
The PVIB I/O pack has processor application code that may contain all the logical code required to allow the battery pack to run from single or dual Ethernet inputs. When operating through two Ethernet inputs, the network path required for correct operation of the IS220PVIBH1A group is always active. If any network fails for any reason, it will not cause any type of interference to the operation of the I/O package, but will indicate the fault through the operation of the network connection.

IS220PVIBH1A

专业销售世界各大电气品牌产品产品海外直接采购，正品库存，价格优惠售后保修，型号齐全，一样的产品，不一样的价格与服务。大量供应原装进口DCS系统配件，PLC系统配件。主营:ABB、GE发那科、Bentl本特利、Triconex英维思、Woodward伍德沃德、Foxboro福克斯波罗、Westinghouse西屋/Emerson艾默生、Reliance瑞恩、SchneiderModicon施耐德莫迪康、A-B、HIMA黑马、Motorola摩托罗拉、Kollmorgen科尔摩根Bosch/Rexroth/博世力上乐，NI,YOKOGAWA横河，等各大品牌的DCS系统配件，机器人系统配件，大型伺服系统停产备件。