带有DP-V1系列CFG端口的MVI69-PDPMV1主通信模块由Prosoft Technology设计，其子品牌为inRAx。该模块使用 CFG 端口作为其主界面，并具有明亮的 LED 指示灯，用于显示模块状态、电源状态、应用程序状态、端动和错误状态等操作元素。与该模块一起使用的连接电缆是 RJ45 至 DB-9 M 和 6 英尺 RS-232 电缆。该模块的背板额定电流为 800 mA，最大电压为 5 伏直流电。电源距离额定值为 2，如果与 1746-L43 和 1746-L45 一起使用，则必须在 2 个插槽内。MVI69-PDPMV1 与单插槽 1769 背板兼容，并被处理器识别为输入/输出模块。MVI69-PDPMV1 模块可用于访问处理器的内存，以在处理器和模块之间传输数据。这两个组件之间的数据传输是使用梯形图逻辑执行的，并且该模块附带了一个可以使用的示例梯形图文件。MVI69-PDPMV1 模块与 CompactLogix 系列的所有处理器兼容，包括 L20/L23/L30/L31/L32/L35、L43 和 L45。此外，该模块还支持大多数MicroLogix 1500 LRP控制器。该模块经过标准化，并通过防爆证书（ATEX指令），CE，CB安全，劳氏船级社，C / UL 1级，2级等批准。使用该模块的环境条件包括 5 至 95% 的相对非冷凝湿度、0 至 60 摄氏度（32 至 140 华氏度）的工作温度范围和 -40 至 85 摄氏度（-40 至 185 华氏度）的存储温度范围。
MVI69-PDPMV1
MVI69-PDPMV1是Prosoft技术模块，用作Profibus主网络模块。该模块特别兼容 Profibus 去中心化外围设备 （DP） 版本 1 工业网络。它是一个单插槽模块，可直接安装到 1769 背板上，供 1769 CompactLogix 控制器使用。此外，该模块还与MicroLogix 1500 LRP控制器兼容。MVI69-PDPMV1 支持通信多达 125 个从设备，带或不带 ProfiBus 中继器。它能够处理多达 1536 个循环字节输入以及 1536 字节的输出数据。此外，此模块支持配置为提供扩展诊断数据。MVI69-PDPMV1 配有一 （1） 个 9 针 Sub-D 母连接器，带有就绪、运行、错误和令牌 LED 指示灯。此端口支持高达 12 Mbps 的标准 Profibus 传输。 多个 Profibus 主站可以安装在一个插槽中;因此，允许主机控制器与各种ProfiBus段通信。此外，制造商提供的附件工具可用于帮助简化硬件配置并定义此模块的数据传输。
MVI69-PDPMV1
The MVI69-PDPMV1 main communication module with DP-V1 series CFG ports is designed by Prosoft Technology and its sub brand is inRAx. This module uses the CFG port as its main interface and has bright LED indicators to display operational elements such as module status, power status, application status, termination, and error status. The connecting cables used with this module are RJ45 to DB-9 M and 6-foot RS-232 cables. The backplane of this module has a rated current of 800 mA and a maximum voltage of 5 volts DC. The power distance rating is 2, and if used with 1746-L43 and 1746-L45, it must be within 2 slots. MVI69-PDPMV1 is compatible with a single slot 1769 backplane and is recognized by the processor as an input/output module. The MVI69-PDPMV1 module can be used to access the memory of the processor to transfer data between the processor and the module. The data transfer between these two components is performed using ladder logic, and the module comes with a sample ladder file that can be used. The MVI69-PDPMV1 module is compatible with all processors in the CompactLogix series, including L20/L23/L30/L31/L32/L35, L43, and L45. In addition, this module also supports most MicroLogix 1500 LRP controllers. This module has been standardized and approved by explosion-proof certificates (ATEX directive), CE, CB safety, Lloyd’s Register, C/UL Class 1, Class 2, etc. The environmental conditions for using this module include a relative non condensing humidity of 5 to 95%, an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), and a storage temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
MVI69-PDPMV1
MVI69-PDPMV1 is a Prosoft technology module used as a Profibus main network module. This module is particularly compatible with Profibus Decentralized Peripheral Device (DP) version 1 industrial network. It is a single slot module that can be directly installed on the 1769 backplane for use by 1769 CompactLogix controllers. In addition, the module is also compatible with the MicroLogix 1500 LRP controller. MVI69-PDPMV1 supports communication with up to 125 slave devices, with or without ProfiBus relays. It can handle up to 1536 loop byte inputs and 1536 byte output data. In addition, this module supports configuration to provide extended diagnostic data. MVI69-PDPMV1 is equipped with one (1) 9-pin Sub-D female connector with ready, running, error, and token LED indicators. This port supports standard Profibus transmission up to 12 Mbps. Multiple Profibus master stations can be installed in one slot; Therefore, it allows the host controller to communicate with various ProfiBus segments. In addition, the accessory tools provided by the manufacturer can be used to help simplify hardware configuration and define data transmission for this module.
MVI69-PDPMV1
There are no reviews yet.