通信和集成在线模块更换，确保连续运行和工厂可用性与Foxboro Evo过程自动化系统和所有主要分布式控制系统(DCSs)集成全面的I/O模块系列多达254个点对点通信节点阿基里斯1级网络安全认证维护内置诊断和冗余管理一对用户透明用于状态和故障分析的简单诊断在线修改和更改、在线模块更换和热备盘插槽，可在不中断运营的情况下实现连续生产适用于安全生命周期每一步的全套软件工 具(TriStation套件) 。
PI3381
步进电机驱动执行机构从一个位置向另一个位置移动时，要经历升速、恒速和减速过程。当步进电机的运行频率低于其本身起动颁率时，可以用运行频率直接起动并以此频率运行，需要停止时,可从运行频率直接降到零速。当步进电机运行颁率b>f日.(有裁起动时的起动预率)时，若直接用fb频率起动会造成步进电机失步甚至堵转。同样在tb频率下突然停止时，由于惯性作用，步进电机会发生过神，影响定位精度，如果非常缓慢的升降速，步进电机虽然不会产生失步和过冲现象，但影响了执行机构的工作效率。所以对步进电机加减速要保证在不失步和过冲前提下，用最快的速度(或最短的时间)移动到指定位置。
PI3381
Communication and integration online module replacement, ensuring continuous operation and factory availability, integrated with the Foxboro Evo process automation system and all major distributed control systems (DCSs). Comprehensive I/O module series with up to 254 point-to-point communication nodes, Achilles Level 1 network security certification maintenance, built-in diagnosis and redundancy management, transparent to users for simple diagnosis, online modification and change, online module replacement, and hot spare slot analysis, A complete set of software tools (TriStation suite) suitable for every step of the safety lifecycle can be continuously produced without interrupting operations.
PI3381
When the stepper motor drives the actuator to move from one position to another, it undergoes a process of acceleration, constant speed, and deceleration. When the operating frequency of the stepper motor is lower than its own starting rate, it can be directly started and operated at this frequency. When it needs to be stopped, it can be directly reduced from the operating frequency to zero speed. When the running rate of the stepper motor is b>f days When there is a pre start rate during cutting, directly starting with the frequency of fb can cause the stepper motor to lose step or even stall. When suddenly stopping at the same frequency of tb, due to inertia, the stepper motor may experience over precision, which affects positioning accuracy. If the speed is raised or lowered very slowly, although the stepper motor will not produce out of step and overshoot, it will affect the working efficiency of the actuator. So for the acceleration and deceleration of the stepper motor, it is necessary to ensure that it moves to the designated position with the fastest speed (or shortest time) without losing step or overshoot
PI3381
There are no reviews yet.